sl0wthe0ry
pfft....MS3?
- :
- Mazda 3s
96 peeps eh? i guess LT gave up on updating ahah.
Ventpod Group Buy Feeler!
- Thread starter LtTroyer
- Start date
- Status
i would prefer the wide band readout but whatever the group wants I suppose
tomcranems3
Member
- :
- 2008.5 Mazdaspeed 3 - Black Mica
count me in for one of these if they are going to be out soon
im new to the MS3 ... anyone have a list of the gauges that will fit this ? i know its a 52mm gauge pod .. will the prosport gauges fit ? those seem to get good reviews
im new to the MS3 ... anyone have a list of the gauges that will fit this ? i know its a 52mm gauge pod .. will the prosport gauges fit ? those seem to get good reviews
Bonafide_Spd3
Member
- :
- 2007 Mazdaspeed3 GT Cosmic Blue
defi red racer... I think i'm gonna get that gauge
Elbows-High
Member
99!!
I'm going out to my supplier to look at the first engineering sample this afternoon. He wants to make some small changes to the tool before making the production parts, and he wants to make sure that his proposed changes won't affect our part as it was designed to fit.
I'll keep y'all posted!
BTW, this IS happening! There is no question about that, so rest assured.
I'm going out to my supplier to look at the first engineering sample this afternoon. He wants to make some small changes to the tool before making the production parts, and he wants to make sure that his proposed changes won't affect our part as it was designed to fit.
I'll keep y'all posted!
BTW, this IS happening! There is no question about that, so rest assured.
99!!
I'm going out to my supplier to look at the first engineering sample this afternoon. He wants to make some small changes to the tool before making the production parts, and he wants to make sure that his proposed changes won't affect our part as it was designed to fit.
I'll keep y'all posted!
BTW, this IS happening! There is no question about that, so rest assured.
can we just hurry it up a bit.... (poke)
Elbows-High
Member
These things take a bit more time than 99% of us would like.
Regretably, I was NOT able to get out to the supplier this afternoon. I work as an engine designer during the day, and our "end of the week" meeting ran WAY over, putting the ky-bosh on my plan.
Not to worry, I will make it out there top of this coming week. I apologize for any delays on my part, but some things are just unavoidable.
Hang in there folks!
Regretably, I was NOT able to get out to the supplier this afternoon. I work as an engine designer during the day, and our "end of the week" meeting ran WAY over, putting the ky-bosh on my plan.
Not to worry, I will make it out there top of this coming week. I apologize for any delays on my part, but some things are just unavoidable.
Hang in there folks!
Boosted333
Member
- :
- '08 MS3
This looks like a good match, right guys?
Autometer ES series... About $70, mechanical.
Not illuminated:
Illuminated:
Autometer ES series... About $70, mechanical.
Not illuminated:
Illuminated:
Elbows-High
Member
Woo-hoo!! 100#!!
Elbows-High
Member
Boosted333
Member
- :
- '08 MS3
See my sig.
7/28, sweet !
how are you going to accept payments, and is there a final price including shipping?
Elbows-High
Member
First things first. We need to get these samples verified/certified. Then we can start making production parts.
There are two ways that this can go down. First is that RPM gets into the mix right out of the gate. This scenario will have buyers purchasing from TheRPMStore.com.
If Donny passes for any reason (I have a verbal commitment from him though), I will have to take care of Vendor Status 'paperwork', and then you will be directed to a PayPal account (you do not need to be registered with PayPal to use this feature).
One way or another, it will be a painless transaction.
Cheers!
There are two ways that this can go down. First is that RPM gets into the mix right out of the gate. This scenario will have buyers purchasing from TheRPMStore.com.
If Donny passes for any reason (I have a verbal commitment from him though), I will have to take care of Vendor Status 'paperwork', and then you will be directed to a PayPal account (you do not need to be registered with PayPal to use this feature).
One way or another, it will be a painless transaction.
Cheers!
First things first. We need to get these samples verified/certified. Then we can start making production parts.
There are two ways that this can go down. First is that RPM gets into the mix right out of the gate. This scenario will have buyers purchasing from TheRPMStore.com.
If Donny passes for any reason (I have a verbal commitment from him though), I will have to take care of Vendor Status 'paperwork', and then you will be directed to a PayPal account (you do not need to be registered with PayPal to use this feature).
One way or another, it will be a painless transaction.
Cheers!
Excellent news. (breakn)
Now we just need to burn a good 2-3 months so that these things will be out and ready to install..
I'm feelling a solid 3 months of hard drugs and harder pornography...
- Status
