Turbo timer question

[035msp]

Is the greddy TT difficult to install? I ordered one, just woundering

 

[DSM2MSP]

Not difficult at all just a little time consuming. Took me about 3 hours, but then again I put it in a custom mount where my gauge light dimmer is.

 

[silverspeedtim]

not at all difficult

Is the greddy TT difficult to install? I ordered one, just woundering

not difficult at all. took me 15 mins to wire. 5 mins to mount. I used a dremel to instal the 03 msp din box mount and then wired it all in. wasnt difficult. one of the easiest installs out there. I used the hi quality clamp quik splices. Easy to install easy to take off and make look astock again by wrapping some electrical tape.
(usa)

 

[DSM2MSP]

not difficult at all. took me 15 mins to wire. 5 mins to mount. I used a dremel to instal the 03 msp din box mount and then wired it all in. wasnt difficult. one of the easiest installs out there. I used the hi quality clamp quik splices. Easy to install easy to take off and make look astock again by wrapping some electrical tape.
(usa)

How the hell did you use those quick splices things? I tried to no avail since those ignitions wires were so thick, I just cut some of the insulation off and spliced into the wires that way.

The hardest part was finding the right VSS wire to tap into for the TT speedo.

 

[silverspeedtim]

How the hell did you use those quick splices things? I tried to no avail since those ignitions wires were so thick, I just cut some of the insulation off and spliced into the wires that way.

The hardest part was finding the right VSS wire to tap into for the TT speedo.

use the thicker blue quik splices. they sell blue and red blue is for thicker gauge wire. should sell them at your local autoparts or electronics store. all the wires are on how to's on this forum. just search and you'll find. some one actually has pics of there install i think it was on a apexi or hks timer. thats what i used for reference.