I finally got around to touching up my paint chips using the Dr. Colorchip standard kit with Soul Red (41V). This is the result I got using 41V, be aware that Soul Red Crystal is actually 46V.
All in all I think it turned out great, but if you have the impression that the kit will completely make chips invisible then nothing will probably impress you! From almost all angles it takes much longer to identify the chips and my wife could barely find them.
Chip Before
Soul Red Crystal vs 41V
Application of Dr. Colorchip
1st Coat
3rd Coat
This is probably the 10th coat I did. I tried a few by just dabbing the paint in the chip itself, but when I used the blending solution is actually made it look worse on those attempts. The dab and smear method seems to work pretty good. After a few coats though I wasn't seeing much of a difference so I called it quits. From about 2ft away they are nearly invisible unless you know exactly where they are.