Spare Protege5 parts and wheels garage cleanout

Clearing out the garage to make some room. Have a few parts to offer for my fellow Mazda folks! All prices are without shipping, PM me your Zip and I'll get you a shipped price for an item....Thanks for looking!

Stock Pro5 brake rotors $40
Have minor wear from typical use, no gouges or warped, have not been surfaced/full thickness


Tanabe DF210 Lowering springs $50 SOLD!!!
could stand a cleaning, but no sag and not bent or cut...lowers car approx 1.5 inch if I remember right, was a nice height when I had them on my P5.


Stock Protege corners $20
These went to my old '99 Protege DX, no damage come with light bulbs.



Stock "16 P5 wheels w/Tires $225
One wheel has a rock bite in it from when some kids where throwing rocks in the street trying to wreck cars...but holds air and isn't cracked as far as I can tell. For this reason I will sell the wheels individually for $75 each or buy all 4 and get the damaged one for free. Tires have about 30% life left and are Kumho ASX 205/50R16.




Black "17 Wheels $250 SOLD!!!
Not sure on the brand of wheel, but they are 17x7.0 wheels 5x114.3 bolt pattern with +50 offset. No damage other than standard chips and scratches on the face and around the "Curb rash" area. Come with center caps and valve stems.


Ray's Versus "17 Wheels $400 SOLD!!!
Have minor rashing and chips, but not bent or cracked. Size is 17x7.0 +42 offset 5x114.3 bolt pattern. Come with center caps and valve stems.


Any questions on anything on here feel free to post or PM me, I am up to negotiations also, so feel free, but no ridiculous offers please...thanks!
 
Last edited:
would i notice the height difference with the tanabes compared to the msp tokico Rb setup.. I need something to hold me over till i get coils in.
 
I ran them on the stock shocks...Im not sure what the MSP RB setup is exactly, but if they ride close to stock height then you will def notice the difference.
 
Here is a pic of my P5 couple years back... Stock shocks with the Tanabe springs on stock wheels... Put the fender gap around maybe an half inch or so.

 
Last edited:
Still have tail lights?

Which tail lights are you speaking of? I have one drivers side stock USDM light, the pass side is broken. But if you arr inquiring about JDM tails, yes i still have the ability to get ahold of them. pm me if that's what ur talking about.
 
Do you still have the springs? How much shipped to 56001? And earlier you mentioned you could get a hold of some JDM tails.....
 

New Threads and Articles

Back