Ultraevolution puts on car shows, does event coverage, features different rides/bios/shop features & model shoots. Im pretty sure next month they are featuring the prosport guages shop here in tampa. Ultra just did a photoshoot with the owner of prosports lambo. Keep posted for it, its free to register!!!
Rhoadblocks MS6 Ultra photoshoot
- Thread starter STRICK-
- Start date
Ultraevolution puts on car shows, does event coverage, features different rides/bios/shop features & model shoots. Im pretty sure next month they are featuring the prosport guages shop here in tampa. Ultra just did a photoshoot with the owner of prosports lambo. Keep posted for it, its free to register!!!
fateexceeds
Contributor
agreed.
fateexceeds
Contributor
that would be better.
hmmm idk. it may sound werid but i think they have to many spokes to be a crazy color like orange.
he should sell them and get these
http://www.tirerack.com/wheels/Whee...el=Alleggerita+HLT&wheelFinish=Orange+Painted
he should sell them and get these
http://www.tirerack.com/wheels/Whee...el=Alleggerita+HLT&wheelFinish=Orange+Painted
- :
- MazdaSpeed 6
Woo!!! Love this car.. Like the theme, and its tastefully carried throughout the whole car too which makes it even better..
Im gonna pick out a few minor things, consider it contructive criticism
Under the hood needs to be painted,its so easy to do gotta get him on that
Is the Intercooler Piping Painted, or Powdercoated.. in the engine bay picture the coating is rubbed off at the top of the pipe coming from the turbo, what caused that?? that needs to be addressed and coated
and heres something ive picked up on with looking into the MS6 engine bay, no one paints or coats the throttle body while the IM is off the car, ive seen that alot.. his throttle body would look uber good in orange!!!!
as far as exterior goes.. hate the big SU stickers.. but thats just because, love those wheels!!! he should do orange or black calipers though not red as it kinda throws the theme off a bit..
BTW this is the first MS6 ive seen with the Full Body Kit on it!! looks bitchin
lastly.. your boy needs to use some Zaino on that b****!!! but seriously the paint would look way better if he did..
i dont think im being to harsh..
Zaino Link
http://www.zainostore.com/
ohh and i tweaked one of the photos a bit.. IMHO mine looks better.. what do you guys think??
Im gonna pick out a few minor things, consider it contructive criticism
Under the hood needs to be painted,its so easy to do gotta get him on that
Is the Intercooler Piping Painted, or Powdercoated.. in the engine bay picture the coating is rubbed off at the top of the pipe coming from the turbo, what caused that?? that needs to be addressed and coated
and heres something ive picked up on with looking into the MS6 engine bay, no one paints or coats the throttle body while the IM is off the car, ive seen that alot.. his throttle body would look uber good in orange!!!!
as far as exterior goes.. hate the big SU stickers.. but thats just because, love those wheels!!! he should do orange or black calipers though not red as it kinda throws the theme off a bit..
BTW this is the first MS6 ive seen with the Full Body Kit on it!! looks bitchin
lastly.. your boy needs to use some Zaino on that b****!!! but seriously the paint would look way better if he did..
i dont think im being to harsh..
Zaino Link
http://www.zainostore.com/
ohh and i tweaked one of the photos a bit.. IMHO mine looks better.. what do you guys think??
Last edited:
RhoadBlock
Member
- :
- Dtec MS6
haha thanks Steve! 
I gotta get on here more. There's just more traffic. I'm on way too many forums anymore lol.
Thanks fellas for your comments, but esp the criticism. Now for some feedback.
lol
-underside of the hood...noted, already been on the to-do list lol
-piping...it's PC. That happened while I was driving on the interstate and got on it. Hot pipe blew out of the coupler and raised it high enough to rub on the cloth heat shielding. I've since removed the heat shield. Already talked to my PC guy about it. I just gotta get the down time for my car. My truck has a messed up 2nd gear, so once I get that fixed, it becomes my DD again and I can have all the down time I want with my car Also trying to find a local shop that can bead roll that pipe. It's the only one not bead rolled on my whole IC system...and the only one that ever blows.
-Throttle Body...I wanted to but didn't have enough time to take it all apart and get the electronics out of it when I did all the PCing. Another little thing on my list though
-body kit...thanks bro. I love it. I've only seen one other guy with the full thing, but he's got me one-upped with the actual CF AE kit. I'm probably just gonna stick with the FG kit tho...because I'm not sacrificing my stance for a $2g CF kit. I do plan on getting the Ducks-Garden rear bumper and tastefully modifying it tho. God this car has become expensive.
-bad paint...on it. I've got a buddy that has done detailing for 20 years. I hate the swirl marks on my car. They'll be taken care of soon. I just haven't had the time on the weekends. Ooorrrrrr.........the car will be sand blasted and redone in matte orange......that'll take care of the swirls.
-pic...nice effects bro. You has PS skillz I does not possess.
I gotta get on here more. There's just more traffic. I'm on way too many forums anymore lol. Thanks fellas for your comments, but esp the criticism. Now for some feedback.
yep lol. The entire underside of my front lip and side skirts are scraped to hell but not noticeable from looking at it. It's impossible to avoid but I do a damn good job at entering driveways and speed bumps at a hard angle. I also have learned all the bad spots around town to avoid...a few of them were found the hard way. But practice makes perfect
lolYep, that's been buggin me since I removed the ducting but I just keep forgetting about it until the next car show/photoshoot...then forget it again immediately afterwards lol. It'll more than likely be taken care of by a CF hood this summer if things pan out right.
Thanks. It's custom piping I routed myself along with a Treadstone TRV185 core. I wanna upgrade to a TR10 when I finally put in this GT3071 that's been sitting in my room for a while too, but we'll see.
Kinda looks that way but it clears the hood very well. The black stain on it was the stock heat shield that dipped down when the hot pipe blew out of the coupler. Since then I removed it (as you've all noticed lol). Probably gonna get it ceramic coated because the powdercoating hasn't stood up to the heat from right off turbo. (just another little thing on the on-going list)
qwik's and boosted's are both sexy as hell imo.
Those wheels are badass. But superskater took my orange wheels already! lol. I may go with orange soon. We'll see. I've got so many other things that I gotta take care of. Hell, I'll probably be tucking my 19x9.5s under there by the time I get to PCing my OZs.
The reply I was waiting for!! I appreciate the constructive criticism bro. I like hearing ppls' opinions/suggestions. They give me ideas...Woo!!! Love this car.. Like the theme, and its tastefully carried throughout the whole car too which makes it even better..
Im gonna pick out a few minor things, consider it contructive criticism
Under the hood needs to be painted,its so easy to do gotta get him on that
Is the Intercooler Piping Painted, or Powdercoated.. in the engine bay picture the coating is rubbed off at the top of the pipe coming from the turbo, what caused that?? that needs to be addressed and coated
and heres something ive picked up on with looking into the MS6 engine bay, no one paints or coats the throttle body while the IM is off the car, ive seen that alot.. his throttle body would look uber good in orange!!!!
as far as exterior goes.. hate the big SU stickers.. but thats just because, love those wheels!!! he should do orange or black calipers though not red as it kinda throws the theme off a bit..
BTW this is the first MS6 ive seen with the Full Body Kit on it!! looks bitchin
lastly.. your boy needs to use some Zaino on that b****!!! but seriously the paint would look way better if he did..
i dont think im being to harsh..
Zaino Link
http://www.zainostore.com/
ohh and i tweaked one of the photos a bit.. IMHO mine looks better.. what do you guys think??
-underside of the hood...noted, already been on the to-do list lol
-piping...it's PC. That happened while I was driving on the interstate and got on it. Hot pipe blew out of the coupler and raised it high enough to rub on the cloth heat shielding. I've since removed the heat shield. Already talked to my PC guy about it. I just gotta get the down time for my car. My truck has a messed up 2nd gear, so once I get that fixed, it becomes my DD again and I can have all the down time I want with my car
Also trying to find a local shop that can bead roll that pipe. It's the only one not bead rolled on my whole IC system...and the only one that ever blows.-Throttle Body...I wanted to but didn't have enough time to take it all apart and get the electronics out of it when I did all the PCing. Another little thing on my list though
-body kit...thanks bro. I love it. I've only seen one other guy with the full thing, but he's got me one-upped with the actual CF AE kit. I'm probably just gonna stick with the FG kit tho...because I'm not sacrificing my stance for a $2g CF kit. I do plan on getting the Ducks-Garden rear bumper and tastefully modifying it tho. God this car has become expensive.
-bad paint...on it. I've got a buddy that has done detailing for 20 years. I hate the swirl marks on my car. They'll be taken care of soon. I just haven't had the time on the weekends. Ooorrrrrr.........the car will be sand blasted and redone in matte orange......that'll take care of the swirls.
-pic...nice effects bro. You has PS skillz I does not possess.
Last edited:
- :
- MazdaSpeed 6
well i think he means all five pieces of the lip kit.. its basically a body kit in some peoples terms..
nextmod says that they have the full ae replica kit, but i can only find it on the ebays and not on their site.
RhoadBlock
Member
- :
- Dtec MS6
I don't know why he never put them on his site. They do have it last I heard at least. I'm the one that pushed him to make it. Took well over a year but it was well worth the effort lol.
