Question for 1st MP3 in NH

[raiderzrule]

or any other audio wizz out there....i have a Phoenix Gold XS6600 system amp that was given to me and i was wondering what kind of power it puts out?....and what type of subs i could use with it....i was hoping maybe a JL 8.1 Microsub or two because they are going in a car that is tubbed with a roll cage and im kinda cramped for space...hehe
And also i have a in my P5 i have a JL 500/1 amp and i can also have a box with two JL 12 W3's(2 ohm) if they will work with my amp....any help would be much appreciated
Raiderzrule

 

[1sty]

Which amp do you want to use the 12W3s with?
Also what are there impedance, dual 2 ohm coils? There are no single coil W3s
Any impedance W3 will work with the JL 500/1.

Heres the link for the amps manual:
ftp://208.187.38.55/Phoenix_Gold/Manuals/Amplifiers/XS/xs6600.pdf

You can definitly do 1 or 2 of the microsubs off of the sub channels of the XS6600. If you use a single one then just wire it to one channel of the amp and you'll get 75 watts to the sub. If you have 2 of them then bridge the amops channels and wire the micros in parallel to the amp. It can handle a 2 ohm bridged load. Each sub will get 150 watts rms.

 

[raiderzrule]

well the subs are dual 2ohm coils and i will be using them with the 500/1 untill i can get a 12 w6v2 or maybe a 10w7...also can you recomend a good set of components and rear door speakers to run off a 300/4....im only looking for JL to keep the system looking clean

 

[1sty]

The JL VR series speakers are the best I have heard until you spend twice as much. The XRs will give you more low bass but less mids and less clarity. I have 6.5" VR componenets runnign of my 300/4 right now and I love them.