Put stock BPV back on,....still backfires.....

stevessvt

Member
:
9 Metro MS3
So I put the stock BPV on, reset the ecu, but it still backfires in between shifts when driving it hard. I do have a second cat race pipe on,....could this be the reason? It has almost 300 miles since ecu reset,.....could be still learning stft/ltft?

Also,...its been raining for 4 days here and I noticed my idle vacuum is about 1/2 psi lower than it used to be. It was about -21.xx now about 20.3-.6. Does weather affect vacuum?


Thanks
 
So I put the stock BPV on, reset the ecu, but it still backfires in between shifts when driving it hard. I do have a second cat race pipe on,....could this be the reason? It has almost 300 miles since ecu reset,.....could be still learning stft/ltft?

Also,...its been raining for 4 days here and I noticed my idle vacuum is about 1/2 psi lower than it used to be. It was about -21.xx now about 20.3-.6. Does weather affect vacuum?


Thanks

it could still be learning, and yes, weather can effect vacuum
 
Check all your clamps to ensure they are tight. 4 on the tubes of the TMIC and the one on the turbo inlet coming from the intake.
 

New Threads and Articles

Back