Progammers/Tuners for a Mazda 6s?

Texansrcool2

Member
:
2006 Mazda 6s
Hey guys. I'm new here so I'm not 100% sure I am even posting this is the right place, but I was wondering if there are any tuners or programmers on the market for a 2006 Mazda 6s. If you know of any please let me know. Thanks people!
 
Hey guys. I'm new here so I'm not 100% sure I am even posting this is the right place, but I was wondering if there are any tuners or programmers on the market for a 2006 Mazda 6s. If you know of any please let me know. Thanks people!

i have tuning availible for the 6s, what year is your car?
 
Last edited by a moderator:
Your link isn't working for 6crew.com......



hmm, thats weird. i just clicked on it and its working. try hitting refresh then clicking the link.

i currently have that availible for the V6 and am starting testing on the 2.3L non-speed as well as the speed vehicles. have already tuned a speed3 with this.

has way more to offer than the standback as well.
 
hmm, thats weird. i just clicked on it and its working. try hitting refresh then clicking the link.

i currently have that availible for the V6 and am starting testing on the 2.3L non-speed as well as the speed vehicles. have already tuned a speed3 with this.

has way more to offer than the standback as well.

Got me. Its working now. I was getting DNS error before.
 
i have tuning availible for 03-08 3.0L V6 vehicles, all that is needed to make it plug and play is to buy an extension harness for the car. can you do me a favor and take a picture of your ecu harness plug.


testing on the 2.3L non speed will be underway soon. as well as the speeds following that

*Link removed due to forum rules*
 
Last edited by a moderator:
what #'s your putting down with TT's great NY ?

havent dyno'd yet, but for reference. one of my best friends has a foxbody stang (1987) and swapped in a 351 windsor, bored 30 over, cams, headers, full exhaust, 5-speed MTX. and carb and s*** is tuned and timing is tuned in for more power.

hes at about 350-375bhp or so and torque should be about 410wtq or so, the stock 351 with no mods is a 300bhp, 380wtq motor out of the box.

he used to pull on me pretty good. loss of about 2-3 cars.

this was before i was boosted. now running 5.5psi on a s*** tune (10.5afr, rich as hell with 15 degrees timing retarded) i walk him. and both our cars weight around the same.

just a guesstimate i'd like to say im definatly over 300whp and wtq, possibly 310-320whp and wtq on the s*** tune the way i walked him a couple days ago. thats at 5.5psi.... but again, thats all speculation and only the dyno will tell for sure.

if i have time, in the next couple weeks, definately before winter, im gonna dyno her and see where she is at on low boost. then turn it up to 8-10psi
 
Maybe one day. But I'm not making a trip that far just for that. I haven't been to VA in a minute tho. Used to swing thru there a lot.

have u been to the track with the TT setup yet?? figured ud have it all running good by now..atleast enough to race it on the 1/4 mile.. be interested in seeing ur times.. should look at getting some slick or drag tires, dont think ull go below 13's on street tires. but hey i could be wrong..
 
have u been to the track with the TT setup yet?? figured ud have it all running good by now..atleast enough to race it on the 1/4 mile.. be interested in seeing ur times.. should look at getting some slick or drag tires, dont think ull go below 13's on street tires. but hey i could be wrong..



Nope haven't tracked it yet. Been too busy traveling with it and working and show. Just came back from canada with it this weekend. Will be away most of october depending on my duty scheduling

As far as running...its runnning great. Not concerned much with 1/4 mile right now, ill get to it when I get to it.. But my NT05's are plenty sticky. And 13's ain't hard to surpass.
 

New Threads and Articles

Back