please help me!

[c0okiecrisps]

my wheel bearing busted, and i dont have money to go to a shop and have it done.


i've got the knuckle off the car, along with the hub.

i already have a new bearing partially in the knuckle, but i cant get it in that last little bit.


does any one have a bearing press they would let me use for like 2 minutes?

please please!

i need my car to get to work, and i cant get to work without that bearing in.

i gots no money =[


i can get a ride to wherever, to get the bearing pressed that last little bit.

please help me out!

if you're going to the mazda meet, i'll make you burgers or something.


please!

i live near hamilton mill, exit 120 off i-85.
i live off 124 (braselton)
im kind of close to the mall of georgia, close to winder, close to l'ville

 

[Shadow102]

got pics of what you have left to do? i have a bearing press here at work but no specific press tools but i may be able to help you out if you can bring the bearing down just inside the perimeter

 

[c0okiecrisps]

its pretty much flush with the outer part (where the hub goes)

but its still got maybe like...1/4 inch left to go down

 

[Shadow102]

can you bring it to me? also i need the old bearing too if you have it.

 

[c0okiecrisps]

oh, i had the old bearing removed, and they threw it away...=[

 

[Shadow102]

well i can try to figure something out then to get it pressed the rest of the way in.

 

[Prodigy]

I have a 20 ton shop press with a pile of old bearings. (and I'm pretty close to Korey's work)
I have no specific tools for pressing in the bearing but I've managed to swap a few.



PM sent.