P5 foglight covers?

[Kontra]

Have no complaints so far. Only thing is that you need to be careful putting them on. You should stick the center first, and then work from the center out. It'll look like is going to crease, but it does not. You just have to rub it on until it is nice and smooth.

Also center it correctly before putting it on.

It took me 10 minutes to install them, and the first one took more time than the second one. Just take your time. Also clean the glass on the fogs well. Some isopropyl alcohol does wonders!

X

well thats all i needed laz. thanks for the quick response too!

 

[laz]

Cool good luck!

Post pics!

X

 

[Flash5]

yeah, catz are the best...and will actually make teh foglights into usable foglights....but $15.00 and 5 minutes totally pwns...$135.00 and an hour or two....

I likey my "yellow" fogs...they be cheap

my catz only cost 65...

 

[Redcoat]

my catz only cost 65...

...& where did you get them for $65? Used?

 

[dd123]

won't putting yellow film on foglight decrease the light output ?

 

[dxaveP5]

not really but if u get new bulbs they will be even brighter and amazing-er

won't putting yellow film on foglight decrease the light output ?

 

[Flash5]

...& where did you get them for $65? Used?

nope they were new, got them on ebay, i also go fog light covers for them too for like $10 more

 

[dxaveP5]

how was the install?
my friend bought one for his 02 EM2 Ex coupe and the wiring was jacked up as well as the foglight switch so we ended up takin it to the shop where they did the whole install.

nope they were new, got them on ebay, i also go fog light covers for them too for like $10 more

 

[dd123]

not really but if u get new bulbs they will be even brighter and amazing-er

what kind of new bulb? How easy/difficult is the install and any how to replace bulb ?

 

[Flash5]

how was the install?
my friend bought one for his 02 EM2 Ex coupe and the wiring was jacked up as well as the foglight switch so we ended up takin it to the shop where they did the whole install.

the hardest part of the install was aiming them, all you have to do is splice the wires together from the stock wiring and the ones on the fogs. then its even better cause u can use the stock light switch which saves alot of time.