Newbie Help Needed!!!

kengima

Member
:
2014 CX-5
I replaced the OEM halogen bulb with LEDs from ebay: http://www.ebay.com.au/itm/130867230069?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

How do I turn on the position lights? The manual says that it should come on along with the headlights but neither side is lighting up.

Could it be that I haven't inserted them tightly enough into the socket? The OEM bulbs took a bit of a yank to come out. I was scared of pushing the LEDs too hard into the socket as I wasn't sure if I should be touching the LEDs with my bare fingers.

Any help would be appreciated.
 
Last edited:
Where does the OEM bulb went out ? Out of the position lights in de corner ? That`s T10 or W5W ? In the Netherlands it`s T10.......and that`s not halogen ! It`s a normal bulb........
 
Last edited:
Yes, the top right or left hand corner next to the indicator lights. The manual says they are a W5W bulb, and I bought a LED version on ebay

I don't know how to turn that light on, so not sure if the LED is faulty or I haven't installed properly
 
Maybe the polarity is off.Try turning the LED around.

I am also interested in replacing the OEM light bulb as well so how do I remove the OEM light bulb out as I already tried and it was too hard to twist around.
is it compatible with the W5W bulb?
 
LEDs are polar sensitive, so try to turn them around


**********************************
 
I am also interested in replacing the OEM light bulb as well so how do I remove the OEM light bulb out as I already tried and it was too hard to twist around.
is it compatible with the W5W bulb?

W5W bulbs don't twist. Just pull it out.
 
Back