Need Suggestions Installing Cone Filter

[floridafred]

Today i removed all orginal mazda pieces from the air filter box to the piece that sits on the radiator. Then right after the mass air sensor i installed a 5" cone filter. My Question is: 1. Is there a aftermarket bracket to connect the MAS to the body for rigidity(or do i have to fabricate my own?) 2. What do i do with the sensor that was inserted in the orginal air filter box(do i make a small incision in the silicon hose between the filter & the MAS & insert it in there?)Any Suggestions would be helpful,Thanks FLAPHRED@AOL.COM

 

[ozz]

you can just make one yourself and as for the sensor take the rubber gromit out of the air box/then take off the piece of intake tube and you can use a knife to cut a whole just big enough for it and put the sensor in