NC, why the 12 yr old attitude? It's clear you're not mature enough to handle someone disagreeing with you. And if you do have all this technical knowledge, then answer these questions for me, off the top of your head without having to do any research.
Q. Why do people use colder rated spark plugs when going turbo?
Q. Under what conditions are colder plugs warranted in use?
Q. Which is better, a boost-pressurse sensative ignition retard system or a knock-sensor ignition retard system?
Q. Which ignition system is better than the other for daily driven use?
Q. Does an ignition system increase your gas milage on a turbo'd vehicle?
Q. What parts of an engine are directly effected by a turbo?
Q. Why is it not always better to run a large intercooler?
Q. What design of intake manifold is better for turbo charged vehicles?
Q. What is better for high HP applications, an internal wastegate or external one.
Q. Why are forged pistons not always the answer and what is the main concern when using forged pistons?
Q. What kind of cam profiles are better for forced induction applications?
Q. What are the pros and cons with using a Cast Iron exhaust manifold and a SUS Equal length exhaust manifold?
Q. Finally, what's the difference between a TIG weld and MIG Weld? Which is better
If you can't answer all of these questions off the top of your head without doing a search on the internet or asking one of your friends. Don't consider yourself as someone with a lot of technical knowledge on turbo's. These questions should be simple to answer if you know about turbos.
I'm not attempting to call you out, I just want to know how much you know and if your posts on turbo's are valid.
Q. Why do people use colder rated spark plugs when going turbo?
Q. Under what conditions are colder plugs warranted in use?
Q. Which is better, a boost-pressurse sensative ignition retard system or a knock-sensor ignition retard system?
Q. Which ignition system is better than the other for daily driven use?
Q. Does an ignition system increase your gas milage on a turbo'd vehicle?
Q. What parts of an engine are directly effected by a turbo?
Q. Why is it not always better to run a large intercooler?
Q. What design of intake manifold is better for turbo charged vehicles?
Q. What is better for high HP applications, an internal wastegate or external one.
Q. Why are forged pistons not always the answer and what is the main concern when using forged pistons?
Q. What kind of cam profiles are better for forced induction applications?
Q. What are the pros and cons with using a Cast Iron exhaust manifold and a SUS Equal length exhaust manifold?
Q. Finally, what's the difference between a TIG weld and MIG Weld? Which is better
If you can't answer all of these questions off the top of your head without doing a search on the internet or asking one of your friends. Don't consider yourself as someone with a lot of technical knowledge on turbo's. These questions should be simple to answer if you know about turbos.
