Msp !!

[boostoli]

SHE MIGHT NOT BE FAST BUT SHE KNOWS HOW TO MOVE AND FUN TO DRIVE
http://www.mazdas247.com/forum/attachment.php?attachmentid=192768&d=1333085537
http://www.mazdas247.com/forum/attachment.php?attachmentid=192781&d=1333194442
http://www.mazdas247.com/forum/attachment.php?attachmentid=192782&d=1333196428

 

[AzteCypher]

Can't see the pic

 

[BRIAN_MP5T]

I vote deleting this thread to the dumpster

 

[boostoli]

sorry lol i thought it did show here is the pic..

http://www.mazdas247.com/forum/attachment.php?attachmentid=192781&d=1333194442
http://www.mazdas247.com/forum/attachment.php?attachmentid=192782&d=1333196428

 

[SCMP3]

Looks good. Underhood shots? What's all done to it

 

[boostoli]

here is the pic ill post it later im rushing have to go to work.

 

[hornsfan10609]

Sweet Titanium man, I can see an upgraded SMIC with a hard cold pipe and a Samco hot pipe. Looks like a BPV setup, can't really tell. You should move the MAF sensor to the cold pipe. It also has what look like SLS or SU solid motor mounts.

 

[boostoli]

Sweet Titanium man, I can see an upgraded SMIC with a hard cold pipe and a Samco hot pipe. Looks like a BPV setup, can't really tell. You should move the MAF sensor to the cold pipe. It also has what look like SLS or SU solid motor mounts.

you think i should move the MAF sensor to cold pipe? is it better?? and thanks thinking of changing my setup ? recommendations??

 

[hornsfan10609]

I would get an ebay FMIC kit and a nice BOV and get rid of the BPV. Then you can relocate the MAF, if you vent the BOV to atmosphere (VTA) you must relocate the MAF to the cold pipe. The stock BPV (bypass valve) is a recirculated setup so you can run the MAF in the stock location before the turbo on the intake.

I have the ebay FMIC and an HKS BOV VTA and I couldn't be happier with my setup.

 

[boostoli]

I would get an ebay FMIC kit and a nice BOV and get rid of the BPV. Then you can relocate the MAF, if you vent the BOV to atmosphere (VTA) you must relocate the MAF to the cold pipe. The stock BPV (bypass valve) is a recirculated setup so you can run the MAF in the stock location before the turbo on the intake.

I have the ebay FMIC and an HKS BOV VTA and I couldn't be happier with my setup.

i was gonna get the ebay FMIC but i didnt think universal ones would fit. any modifications that need to be done to it?/

 

[hornsfan10609]

You have to figure out your pipe routing and do some cutting of the core support. If you want you can also cut the crash bar. The universal kits fit, they are universal so technically they can be installed in any car.
Read this thread, several people including myself have contributed and posted pics and it's all you need to know about ebay FMICs.
http://www.mazdas247.com/forum/showthread.php?123759220-How-To-Ebay-FMIC

Be sure to read the later posts, the later posts by members have better pipe routing.

 

[boostoli]

You have to figure out your pipe routing and do some cutting of the core support. If you want you can also cut the crash bar. The universal kits fit, they are universal so technically they can be installed in any car.
Read this thread, several people including myself have contributed and posted pics and it's all you need to know about ebay FMICs.
http://www.mazdas247.com/forum/showthread.php?123759220-How-To-Ebay-FMIC

Be sure to read the later posts, the later posts by members have better pipe routing.

if i was to do this little project you wouldnt mind helping me doing it lol?? looks kind of difficult lol