MSP World Challenge Wind Splitter

noclue119

Official Yinglish Speaker
:
1990 Mazda Miata
*update 1*

I found one. However i might need someone to pick it up for me to send to DG for molding

*orginial post*

Does anyone else think the wind splitter is really nice?

World_Challenge_Wind_Splitter.bmp


or

mazdaprotege.jpg


Its for the 2003.5 mazdspeed. but i'm sure it will fit the 2003 no problem.

now the bad new its costs $1020 from corksport.


So here is my plan.
1. Find someone with this piece ask them pay them $100 to let DG to make a mold of it for replicas.
or
2. Email the companies who race the Protege in the World Speed Challenge and bag them to let me borrow, buy or rent the piece to make a replica of it. *doubtful* worth a try
or
3. still working on soultion 3

Does anyone else like this piece. give me some feed back before i start working on this.

Keep in mind that this is a function piece. It reduces lift on the front end at high speeds, creates down force on the front wheels and it channels more air to the raditor and intercoolers.

if u don't understand it read
http://www.aprperformance.com/prodsubcatdesc.php?catID=3&subcatID=16
 
Last edited:
admin please move 1 level up to the Mazdaspeed protege section because this is both an apperance and preformance.
 
I love the look of that lip, which is the reason I did the custom lip that I did do. I sure as hell wasnt about to fork over $1,000+ for that...

Here's my cheaper and cleaner solution to my wants...lol

Sorry about the old ass pics, but they are the best ones of the lip I have.
 

Attachments

  • lip4.webp
    lip4.webp
    30.5 KB · Views: 571
  • lip5.webp
    lip5.webp
    29.6 KB · Views: 636
  • lip7.webp
    lip7.webp
    27.4 KB · Views: 404
  • lip8.webp
    lip8.webp
    26.9 KB · Views: 391
once again i'm not looking for a lip. My 2003.5 already has a lip. I want this for the front wind splitter. Its functional not just looks.

Dexter are u talking about Boosted Orange's lips or the front wind splitter
 
im talkin about the boosted orange lip.


Also, i think that:
generic fg or cf splitter + garden edging + silicone RTV + screws = world challenge windsplitter
 
the world challenge cars have more than just a splitter. it runs underneath the front of the car, under the engine, etc. that's why its so expensive.
 
mx3ownzj00 said:
the world challenge cars have more than just a splitter. it runs underneath the front of the car, under the engine, etc. that's why its so expensive.

Ya i know, whatever that piece is i want to make a replica of it. because we all know that this piece could be cheaper. Besides i'm more intrested in getting more air into the raditor and SMIC
 
^^ um, that's cool, except it would make changing your oil a real pain
 
JCell said:
^^ um, that's cool, except it would make changing your oil a real pain

Acutally i can't really go that far back because i remember reading hte specs on the WSC protege. and one used a Dry Sump system while the other used a Wet Sump system with the stock oil pan IIRC. So that means the front end wind splitter didn't go as far as u think or the piece had to come off each time they did an oil change which didn't make a whole lot of sense to me
 
It goes back to the front of the tires. Just enough room to change the oil.
 
CorkSport said:
It goes back to the front of the tires. Just enough room to change the oil.


since u are here what are teh chance we can setup a group buy for this? how many people do we need and what is the price?
 
noclue119 said:
admin please move 1 level up to the Mazdaspeed protege section because this is both an apperance and preformance.

I disagree, it is an appearance mod and belongs in this subforum.
 
Too bad the proteges that ran in the WRC were not MSP...They are not even boosted...All motor...And they don't run them anymore as far as i know.
 
Back