MPI Tuner install?

[apocman]

BiGG T. what was the deal with the way and location the TM is installed? I remeber some wire from the TM was connected to a certain wire under the middle console on the drivers side of the shifter and in between the E-Brake... I also remember that my wires were totally different i.e. color and guage size etc. than the old TM and the instructions I had had two to many becuase you didnt need them with the new TM install.

 

[Metal MP5]

Not the best example ... but this is what mine looked like after rewiring it 4 times ... we found out a couple of days later that i had a bad turbo module =\ but yea, ugly wiring. i did what i could to clean it up a bit after that but anyway hehe

 

[Bigg Tim]

BiGG T. what was the deal with the way and location the TM is installed? I remeber some wire from the TM was connected to a certain wire under the middle console on the drivers side of the shifter and in between the E-Brake... I also remember that my wires were totally different i.e. color and guage size etc. than the old TM and the instructions I had had two to many becuase you didnt need them with the new TM install.

I extended the power wire to reach the fuel pump wire under the console. You will see this in the instructions when the link get's fixed. I wanted everything to be under the kick plate, so that's why it's that way. You can do it however you want. The TM can go anywhere as long as you have long enough wires.

 

[ChopstickHero]

good luck with your install .... keep us updated on the intall process and tuning

 

[Bigg Tim]

The link works, it was just slow to update. Take a look and let me know if they help.(thumb)

 

[bazooka joe]

I'll hit you up with a nice set of instructions I recently made for nick. It has pics of almost every step. I won't be able to get them uploaded until tomorrow afternoon, but you will have them! The file may be too big, if so, I'll have to send them to you, but I would like to put them on the forum for everyone.

tims the man!!

 

[Crazee D]

MPI install

About to start mine...how's it going?

 

[ca_deal1]

I just got mind MPI Tuner, Thinking about install it the week.

 

[apocman]

let us know if you guys need help pm me for my cell # I have been part of two MPI installs inculding a J&S with MPI install and I am about to install 2 more MPI's maybe even start this weekend on them...

 

[apocman]

I got maps for MSP's with the new turbo module and with the old turbo module, so let me know what maps you want, I will be installing and tuning a boosted P5 very soon, so I will have those maps as well very shortly...