Mazda of the Month - ENTER NOW for January!

Status
Not open for further replies.

Antoine

Administrator
Welcome to the Official Mazdas247.com "Mazda of the Month" Contest!

* The MOTM is OPEN to ALL Mazdas! *

Please note the following rules & guidelines.
Your cooperation and participation would be greatly appreciated, thank you.


ENTRY RULES

1. ANY form of cheating will result in immediate disqualification and removal from the contest.
2. You must own the Mazda you are entering into the contest.
3. Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.
4. If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered.
5. If you become a MOTM winner, you may not enter the same Mazda again until at least 12 Months after the month you had won. However, if you own several Mazdas, you are welcome to enter those as well.
Note #1: Each Member may NOT enter more than one Mazda per MOTM contest.
Note #2: Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.
6. Once you have entered (posted) your Mazda, you may not withdraw from the contest.
7. The MOTM contest & rules are subject to change in order to maintain a fair & fun environment for the Mazdas247.com community.

Contest Requirements:
* Each contestant must submit three single high-quality high-resolution images of their Mazda. One image must be of the exterior, another the engine bay and finally an interior shot. Compilation style shots (multiple images within a single image or picture size frame) are NOT ALLOWED!!!
* Each contestant must follow the format shown below or your entry will not count!!!
* Any form of photo/image manipulation is not allowed except for adjusting and enhancing image color, contrast, tone and levels etc.

FORMAT:
1. Username
2. Name
3. Model name + (Year)
4. ONLY 3 Images (one exterior + one engine bay + one interior shot) NO ATTACHMENTS PLEASE!
5. "Mod" List *NOTE* It must be posted in default "Verdana" text size 2. No colors and No funky formatting!Please make your list CLEAR & CONCISE!

WAIT! Before you take & post pics...Is your Mazda?
* Washed & Waxed?
* Engine bay clean?
* Interior clean?

Now that your ready to take pics...Is your Mazda?
* In a well lit place?
* In front of a sweet background?
* Engine bay well lit?
* Interior detail visible?

Finally...Is your Mazda MOTM Entry?
* CREATIVE?!?! *

Example (Obviously, this is NOT my ride but for the sake of an interesting example ;) ):

Antoine
Antoine
Mazda 767B (1989)
booya.jpg


the%20bay%20shot.jpg


int%20shot.jpg


Performance Mods:
Top Secret

Engine Appearance Mods:
Top Secret

Exterior Mods:
Top Secret

Interior Mods:
Top Secret

Stereo Mods:
lol...Stereo

Awards Won:
Beyond awards...

Recognition:
Raced at Le Mans...Helped lay the groundwork for the 787B which won Le Mans in 1991.

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

Now on to the fun part...PRIZES! Check out what you could WIN! (first)

(birthday) Have your Mazda showcased on the Mazdas247.com Home Page!

(birthday) From Speedcircuit.net: 5% off any purchase made that month!

(birthday) From Antoine: $50 Cash bonus only if the owner has a *CLEARLY VISIBLE* Mazdas247.com related Sticker/Decal on their car in the MOTM image. Note that the Sticker/Decal has to be a Mazdas247.com related domain decal. Checkout the official Mazdas247.com decals below:

<label for="rb_iconid_2">
icon2.gif
</label>
*New* Mazdas247.com Decals

<label for="rb_iconid_2">
icon2.gif
</label>
Mazdas247.com Decals

<label for="rb_iconid_2">
icon2.gif
</label>
Mazdas247.com Related Decals

GOOD LUCK to all who enter! (thumb)


VOTING RULES

1.
All voters must have a postcount minimum of a 100 posts and have been a Mazdas247.com Member for at least 1 month. The only exception to this rule is for Contestants who are also new members.

2. There is NO tolerance for PERSONAL CAMPAIGNING threads, posts, private messages (PMs), images or links (including signature and or image links). The creation of such ANYWHERE on or off the Internet including Mazdas247.com will result in that car's immediate disqualification. *If you are disqualified, your entry & poll listing WILL remain but your votes will be removed. Everyone will see that you broke the MOTM rules.

3. Creating general "Vote for the MOTM" threads and links are not only allowed, it's encouraged!​
 
icon4.gif
NOTE: Please keep this thread ON TOPIC. Thank you and once again, good luck! (first)

Please note the following new rule!

4. If you wish to enter two or more times in a row, you will need all new photos of your Mazda for each consecutive month entered.

...and the same applies for MOTM winners who wish to re-enter: Note #2: Previous MOTM winners who wish to enter again (after 12 months) must enter with all new photos of their winning Mazda.

DEADLINE to ENTER is January 10th 2011!
 
Let's start 2011 off with one hell of a lineup...Enter NOW to win the first MOTM of the New Year! (first)
 
TWISFM
Ian
2002 Mazda Protege5

P1010653.jpg


P1010679.jpg


P1010689.jpg


Current mods...Daily driven

Suspension and wheels:
57 Optimise Gramlights 17x7.5 +50 with 5mm spacers for an effective offset of +45 wrapped in nexxen 205/40 tires -3 degrees of camber all around
BC Coilovers
BC Endlinks

Engine:
MP3 ECU (flashed)
Injen CAI with an RE metal filter running with the AEM water-bypass
PnP MSP intake manifold with VTCS removed
NSN Intake manifold thermal spacer
Medieval lightwieght powersteering pulley
Medieval lightwieght alternator pulley
Medieval lightwieght water pump pulley
RR-racing UDP
2.5 inch mandrel bent j-pipe back exahust with a vibrant tpv muffler, vibrant resonator, and magnaflow resonator
MSP oil cooler setup
MSP shifter
SU rear MM
Medieval front MM
Awr side inserts
Kartboy shifter bushing
Corksport bronzoil shifter bushings
Corksport exhaust hangers
Ground kit

Appearance:
DGM urethane front lip painted top half p5 white and bottom half msp black with flake
DGM fiberglass grill
DGM fiberglass rear valence
MSP black hood (sometimes)
MSP engine cover
MSP shift boot and knob
Medieval ADP
orange extended and open ended lug nuts
original Dave-B rings
familia, 323-f badges and evil M
Black p5 wing
Black mirrors
blacked out headlights and side markers
Black header cover
Rally Armor MudFlaps
shorty antenna
tinted tails
yellow lamenx film for foglights
tint
stickers
....more?

Safety/Electronics:
Prosport oil pressure gauge
Forcefed steering column pod
MSP alarm system
Techone HID kit 6000k and 7000k
K40 Radar Detector

Random:
Fogs always on mod
clutch bypass for starting car
lots of strobes and neons...from the rice days

Recognition:
Daily Driven at about 2.5 inch clearance
Slammed VP
 
Last edited:
I try very hard on my baby.....going to paint it real soon......but ill go head and enter just to see wat i go probly nothing right now lol....

Joseph Acosta
99 mazda protege.....

DSC01569.jpg

DSC01563.jpg

DSC01468.jpg


Engine:::::::::::

Custom intake / wraped.........
Obx 4-1 header / wraped.......
Painted p5 strut bar......
Front and rear billet motor mounts.....
Aluminum mishimoto radiator.....
Corksport exhaust with custom axle back.....
Took out power steering and ac.....

Engine Appearance::::::::::::

Painted valve cover....
Painted strut bar.....
Mazda decal.....

Interior:

Custom silver painted parts.....

Exterior:

Roof rack....
Edge RE14 17/7 inch rims
 
Last edited:
1. Herblenny

2. Phil

3. 1991 Mazda/Eunos Cosmo 20B/3 Rotor Type-S Black on Black

4. Photos


Exterior

2.jpg


Interior

cosmointerior.jpg


Engine Bay

CosmoEngine.jpg


Mod List

Engine
- Powder Coated Upper Intake Manifold, Throttle Body, Intake Pipes, etc by Kevin @ Rotary Resurrection
- NGK 9s
- Rotary13B Oil and Brake Caps
- K&N Cone filter
- Morgan Performance Fabrication Custom full back system with 3 x Magnaflow SS mufflers and custom dual Dolphin tips

Suspension
- Tein Coilovers
- Cusco strut tower bar, custom painted to match the wood interior trim
- WORK VS-XX 18x8.5 Front with 255/35/18 KDWs and 18x10 Rear with Nitto Drag Radials

Interior
- Momo wood steering wheels
- Wide rearview mirror

Sponsors
- Exedy Clutch USA (www.ExedyUSA.com)
- BNR Supercars (www.BNRturbos.com)

Future Mods at work
- Big Brake set up using FD and RX8
- Modified stock hood for custom vented hood
- New Paint
- New Stereo System
 
Last edited:
1. PPO2Kane
2. Kane
3. 2007 Mazda RX8, Ported, Ceramic Sealed and Turbocharged
4. Pictures
010210_0643.jpg

010210_0623.jpg

DSCF0039.jpg


5. "Mod" List
Powertrain / Tuning:
* All power modifications stealth installed, goal is to keep engine bay looking 100% stock *
13B-MSP Ported and Hand Built by Black Halo Racing
Ceramic 2mm 1-piece Apex Seals from NRS Rotorsports
Rotors Milled by Speedsource
Black Halo Racing / Spec Stage 2 Clutch
Mazmart Waterpump
Powder coated all Pulleys Piano Black
Greddy Manifold, Down pipe, Intercooler and Intake Piping (powder coated stealth black)
Custom Garrett GT3071R Turbo by Mazda Maniac
Synapse Syncronic BOV - recirculated like a real man...
Custom AEM Air Intake with K&N Filter hidden in bumper
Greddy SP2 Catback Exhaust with gutted cat and resonator
New Flow-matched 400cc, 400cc and 800cc Injectors (brings total fueling well in excess of 400WHP)
Black Halo Racing's 3 Core Aluminum Radiator by Griffin
Agency Power Silicone Radiator Hoses
Cobb Accessport PCM Flash Tuner
Custom Tuned by PPO2's automated tuning software; Baseline
Stealth Oil Catch Can fabricated from OEM Air Pump
Greddy Front and Rear Strut Tower Brace (powder coated stealth black)
Black Halo Racing's Yukon Coil Ignition System

Suspension / Braking:
Tein Coilovers
Prototype KVR 2-Piece Slotted Rotors, Aluminum Hats and Hawk Ceramic Pads
Agency Power SS Brake Lines
Gorilla Blue Racing Lug Nuts

Interior:
Greddy Turbo Timer and Profec II Boost Controller
Autometer Cobalt AFR, Boost and EGT in Lotek dash pod, custom molded to center console, Piano Black
Autometer Elite Fuel Pressure Gauge in Vent Pod from BlockHead
iPod Integrated into Bose system
Hymee Scanalyzer Live for the ODBII Info
PPO2 White Retro Shift Knob custom counter-weighted by Koolknobs
Custom Center Console and Head Unit w/ remote mount Radar & Laser Detector
Italian Leather Shift Boot and Arm Rests from Shiftstyle

Exterior:
Authentic Mazdaspeed Full Bodykit
19" Staggered (9.5"+28mm rear, 8.5"+35mm front) SSR D5R Wheels on Federal Tires w/ Fender Roll and Stretch
35% Tint on windows; 5% Tint on sunroof
Fender Vents Paint Matched to Wheels in Top Secret Gold

Sponsors:
Ron's Performance
JN Mazda
PPO2 Performance
Street Unit

Awards Won:
Top Mazda, Car Domain
 
Last edited:
Damn that is a sweet lookin RX-8!

edit: oh and January is my birthday month so let's make the entries good!
 
Last edited:
1. Laserbluep5

2. Ian

3. 2004 Mazda3 Sport

4. Pictures

Mazda3moth2.jpg


Mazda3moth.jpg


Mazda3moth3.jpg


Exterior Mods:​

GFX style front lip
AUTOEXE style front grill
Mazdaspeed Side skirts
Custom Eyelids
Eibach sportline springs
Polished RX-8 18 inch rims
Nitto Invo 225-40-18
MazdaSpeed3 OEM Rear spoiler
6000k low, high and fog lights
Hyperwhite led liscense plate lights
Functionnal shark fin antenna also hides the sirius antenna under it
Removed side door molding for cleaner look
Racing red powder coated brake calipers
EBC green stuff brake pads
drilled and slotted rotors​

Engine mods:​

Fujita F5 Coldair intake system
Mazdaspeed headers and catback combo
Polished Vibrant strut tower bar
Full synthetic elf racing oil
E3 spark plugs
Optima yellow top battery​


Interior Mods:​

Pioneer Avic-Z110BT headunit
sirius radio tuner (under passenger seat)
Rear view Camera custom molded where third brake light was before
Rockford Fosgate P500.2 Amp
1.2 farad Stinger capacitor
Mtx 400 Watts RMS Subwoofer
Bassworx 10 inch ported sub enclosure with carbon wraped front facia
Carbon wraped door handle surrondings, radio bezel and center console.
Hyperwhite led map lights
Hyperwhite led trunk light
Weathertech front and rear DigitalFit floorliners
Black suede headliner and pillars
Compustar 2 way alarm starter combo with remote paging
Compustar DRONE (Enables me to control my compustar system with my Iphone)​
 
Wow Chrome RX-8s. Cool.

I dont want to try just yet. Maybe in the Summer. Ill have the car back in shape. Good luck to all!
 
Username
2. Blake
3. Miata, 1990 (mostly)
4.
5199984303_317ebde1b7_b.jpg

photo_2_.jpg

pist6.jpg

5.
  • Stuart Motors built head
  • 2008 Mazda Crate Motor
  • Advanced Autosports straight intake
  • Racepak Data acquisition
  • Momo Steering wheel
  • Toyo RA-1 tires
  • Mazda Spec suspension (sways, springs, shocks)
  • Springfield Dyno exhaust
  • Torsen differential ('99 issue)
  • Advanced Autosports full roll cage
  • Koyo Aluminum Radiator
  • R Lip Spoiler
  • G Force Restraints
  • Sparco Race Seat
  • Saferacer Tow Hooks
  • Saferacer Permanent hardtop mounts
  • BTDTRacing custom '99 issue top hat suspension adaptors.
  • AEM Uego Air Fuel gauge
  • Team Dynamics or Kosei wheels
 
Last edited:
will be entering ... updated first post... need engine and interior shot

edit. think i gotem
 
Last edited:
Maleskimp3
Nate
Mazda Protege Mp3 (2001)
163433_185115981516171_100000533128336_587665_4939713_n.jpg

The moment it was all put back together and you stand back and just look.....
162918_185117274849375_100000533128336_587672_2014295_n.jpg

163635_185327138161722_100000533128336_589078_3881897_n.jpg

Performance:
Garret 60-1
Wiseco Pistons 20+
Paulter Rods
Toga Hp main and rod bearings
Toga HV oil pump
Cometic gasket set
Cometic head gasket
NRG plugs and wires
Obx raditor hoses
Samco hoses
Vibrant silicone couplers/clamps
Slim fans
Jay Racing Man intake
Jay Racing down pipe
Jay Racing test pipe
Greddy Exhaust
Fidanza Flywheel
Act clutch and pressure plate
MSP cams
MSP drive shafts
Tre Performance 342 fuel pump
440c injectors
626 manifold
Greddy type rs bov
fake Tial wastegate
Jay Racing wastegate dump
Green 4" filter
Obx under drive pulley
Medevil power steering pulley
Gates belts
SS lines
Greddy radiator cap and catch can
PCI timing kit
MSP windage tray
Shocker oil cap
OBX header
MSP ECU
AEM FIC
AEM Wideband
Boost gauge
Oil pressure gauge
Greddy boost controller
Greddy turbo Timer
Tokico Illuminati struts
Max speed coils
Progress rear sway bar
Megan Trailing arms
Jay Racing thermostat housing spacer.
Drilled and slotted brakes
ebay Intercooler
ARP studs
AWR full mount set
rebuilt stock trans

Look good stuff:
Nrg Short hub
Nrg quick release
MOMO Race SW
MSP dash cluster
Harness bar
3 pt harness
CF grille
Vis carbon hood
MSP mats
MSP rear sub deck
Jay Racing radiator cover (not shown)
Pioneer head
Euro tail lights
Vortex generator
MSP knob

Recognition:
Jay Racing
Ol'e Red
Family
Parsons
Protege Garage​
 
Status
Not open for further replies.

New Threads and Articles

Back