"Borrowed" from the other forum, props to Sisith
The top denotes the half of the harness that has 8 wires, these wires are bigger than the others and are the speaker outputs. The bottom half has 9 wires and these are the inputs for the seperate channels. These are the harnesses going to the bose amplifier under the DRIVERS SEAT, these are not for the back of the headunit. As far as I could tell from my tests, the bose hu and the stock hu are exactly the same.
Without further avail:
TOP - In order from left to right *EDIT* These are the speaker outputs
grey w/ red stripe (FR-)
white w/ red stripe (FR+)
grey w/ black stripe (FL-)
white w/ black stripe (FL+)
solid grey (BR-)
solid white (BR+)
grey w/ white stripe (BL-)
white w/ purple stripe (BL+)
BOTTOM - In order from left to right *EDIT* These are the inputs to the amp
solid blue (remote turn on)
solid purple (FL+)
green w/ white paint (FL-)
solid red (FR+) *edit switched from FR-*
solid green (FR-) *edit switched from FR+*
brown w/ blue stripe (BL+)
yellow w/ blue stripe (BL-)
yellow w/ green stripe (BR+) *edit switched from BR-*
white w/ blue stripe (BR-) *edit switched from BR+*
*EDIT* Clarified the inputs and outputs to make it actually useable =)
*EDIT* This is the final and complete wiring diagram. No out of phases anymore. Thanks Redmist for picking up on the FR +/- switch, that was what I needed to figure out the pattern.[/QUOTE
STICKY THIS IF ACCURATE