How to decrease/fix/modify the wastegate actuator so it will limit at 6 psi?

[IllaNoizeTV]

I believe my wga is not working properly. I'm not sure which component but pretty much it doesn't limit the boost to 6-7psi. It lets me go up to 10-12psi before hitting fuel cut. Should I buy a new wga (my last option) or is there a way to modify my original one to limit the boost to 6-7psi? I heard of bending the wga arm? Or cutting the arm, threading both sides then put a nut on it? I also heard of connecting a plastic T to the vacuum tube coming from the wga then having another tube coming from the extended T then cutting the extended tube until I get the right boost amount? Can anyone help please?

 

[SicMSP03.5]

Eh if it's adjustable you have to adjust it outwards make it longer. And i have done the T but it also just adds boost


Sent from my iPhone using Tapatalk

 

[IllaNoizeTV]

Its the stock one. What's the procedure to adjust it?

 

[SicMSP03.5]

I don't even think you can adjust the stock one :/


Sent from my iPhone using Tapatalk

 

[Valk]

just buy atp. this is normal when the wga goes out. when you take it out, you will prob be able to blow through it np. if all you want is stock levels of boost just stick to the atp. forget about the forge.

this guy
http://www.atpturbo.com/mm5/merchan...p&Product_Code=ATP-WGT-011B&Category_Code=WGT

i think i had to shim it with nuts or somthing as its a little big longer, but not a big deal at all.

 

[IllaNoizeTV]

Thanks bro