*HELP w/ running lean after installing intake (rd6066)

[skilletrx]

- - - - posting for friend - - - -

hey guys..i'm a noob with these kinda things... but please help!

I'm having some trouble with my car. After installing my intake (rd6066), I came across a couple problems soon after.

1) At times the car would just stall while in motion.. I checked the VAC lines for leaks, the couplers, and everything looked fine.

2) Now, the CEL comes on

I brought the car to the dealer and they told me the car was running too lean.

Anyone have any ideas/solutions that dont lead to the removal of the intake?

 

[Puckpimp71]

Double check where the CAI attaches to the turbo. It might look like it's on but it's come off on me a couple times. Did you remember to reset the ECU?

 

[orng1]

I kept knocking off the hose from the MAf so keep looking, I bet you have a loose cleamp or somethings come loose.

 

[skilletrx]

imma tell him to take off all the clamps and then re-secure them. thanks ill be back here if theres still an issue

 

[BlueBeast22]

Make sure you didnt put the MAF in backwards when you installed the CAI. If its backwards it will cause the car to run like crap.

 

[BCMSP3]

You should check out a thread I just started. This may shed some light on your problem.

http://www.mazdas247.com/forum/showthread.php?t=123684892