Help using NAVONE 4ch LOC

[ghetto waggon]

Alright this is hopefully my last pain in the arse newbie question.

I've almost got everything wired up and just wondering about my power to the head unit. I am using the stock 6 disc, into an OEM harness -> navone 4ch loc -> rca's -> amp.

The yellow power and black ground wires coming from the harness have nowhere to connet to. Each of the four channels, + and - are connected though.

Will the head unit recieve power from the Amp via the RCA's with it setup like it is?

Or do I need to tap back into the original harness on the car and run to a power cable?

Help MUCH appreciated. Just too afraid to short something out.

Thanks!

 

[chuyler1]

heh. You need all the wires from the stock wiring harness connected except for the 8 that are connected to the LOC.

 

[ghetto waggon]

sorry if you'd bare with me and spell it out....im a dumbass

there are yellow red blue and black still left

i think the remaining blue wire is the dimmer/illumination, red i dont know

do you still have the image that shows which wires on the stock harness are which?

 

[ghetto waggon]

am i correct that the thicker black wire in the corner of the stock harness is the power?

 

[ghetto waggon]

info found, thanks confused