greddy type rs

[tallrd]

(huh) what's all this about screws stripping on their own? Which screw? I just installed my type s last night.

It's the screw that tightens down from the top of the unit which adjusts how soon/late it blows off.

 

[peepsalot]

So 3 out of 3 people in this thread that had type S had this screw stripped? (nervous)

 

[tallrd]

So 3 out of 3 people in this thread that had type S had this screw stripped? (nervous)

mine is an "RS" but still a Greddy which stripped.

 

[tallrd]

does anyone have a sound clip of the greddy type rs vented on their msp?
thanks

Here's a vid of a quick drive by from a roll through first with a quick romp on the throttle and then too neutral. It's 1.6mb so I hope you can view it w/o killing your computer/connection speed. You can hear it rev and then a beautiful "whooooshhh." Again, just reving the engine while in neutral doesn't give you an accurate idea of the sound. I had one from the interior but it exceed the 1.95mb file size for attachments.

 

[tallrd]

Here's a vid of a quick drive by from a roll through first with a quick romp on the throttle and then too neutral. It's 1.6mb so I hope you can view it w/o killing your computer/connection speed. You can hear it rev and then a beautiful "whooooshhh." Again, just reving the engine while in neutral doesn't give you an accurate idea of the sound. I had one from the interior but it exceed the 1.95mb file size for attachments.

I just found out the hard way that you will have to "save target as" and then onto your computer. I wasn't able to simply click on it to open

 

[mspHtown]

thanks alot for posting it. it sounds great.

 

[FunkyBuddha]

sounds wicked.

i think we need a sticky thread where all can post bov sound clips/video clips.

 

[tallrd]

thanks guys. glad I could help (not like I needed yet ANOTHER excuse to rev my engine ). When I asked my wife to film this, she just looked at me with this "you better not be having sex with your exhaust pipe" type of look. lol. I told her to just do it and don't ask any questions.

 

[tallrd]

to answer mspHtown pm...

I had a 19mm o.d. stainless steel pipe welded on my hot pipe which recirculates THROUGH the stock bpv into the inlet on my Injen. I should mention that this has been done by a lot of others before me so I can't take credit for this idea.

If I were to do it again, I'd have angled that 19mm down a little more cuz my hoses have to bend a little (but not enough to justify 90 degree hose). Since doing this I have NOT stalled once. That said, I do dip down to 250-500 rpms and then stableize sometimes if I take it up to 4-5K rpm and then go to neutral.
does this help?

 

[mspHtown]

yea it does help thanks

 

[ZMN BY U]

hey will the type rs bov fit on the hiboost kit. i know the type s will but how bout the type rs i was told it has same bolt pattern as the s model.

 

[tallrd]

'tis the same flange size, so yes it will bolt right up. Everything is exactly the same with the exception of the outlet size.

hey will the type rs bov fit on the hiboost kit. i know the type s will but how bout the type rs i was told it has same bolt pattern as the s model.