FS: SPEC Stage 3+ Clutch and SPEC Flywheel

Status
Not open for further replies.

Maxx Mazda

Contributor
:
Stock P5
Part number SZ493F it's the SPEC stage 3+ clutch, pressure plate, and SPEC 7lb flywheel. Barely used, as you can see still plenty of life left in it. Used for one summer, about 5,500Km. NOTE: THIS WILL FIT ALL 3RD GEN PROTEGE MODELS (MSP, P5, MP3, SEDAN)

I will seperate the clutch and flywheel if anyone is interested, but they were balanced together so it's good to get the whole set to avoid having to rebalance. I will also include all hardware and clutch tool (not pictured) as well as the FC RX-7 Throwout bearing for an extra $30. That thing is beefy as hell.

Clutch: SOLD!!!
Flywheel: SOLD!!!


Sell03.jpg


Sell02.jpg


Sell01.jpg


Sell05.jpg
 
Last edited:
If you want to pay for the shipping then by all means, however I'd reccomend getting the whole assembly then (clutch too) if you're gonna do that.
 
Yes it can be replaced. I'm the 2nd owner of that flywheel, I just replaced the friction plate with a new one 5,500 Km ago when I put the brand new clutch in. I'm selling it because I'm running a different one.
 
Status
Not open for further replies.
Back