UKtheGREAT
Member
- :
- 2003.5 MSP
Among the many of parts I will be posting soon, here are the first two to go.
(BLUE) Nology Hotwires Part# 011 364 256 , Mazda Protege Speed
NOTE: This kit is made for the Mazdaspeed Protege utilizing 2 Coil packs, and includes the Coil-on-plug conversion.
> Purchased this a couple months back originally going with blue for engine bay colors. Before I even opened it, I had changed my mind to black and silver. Contacted the retail seller of the item, and they said they were already being made, so no hope in changing it at that point. This kit was opened to get accurate pictures to post for sale. Has NEVER BEEN INSTALLED on any vehicle. This kit is quite literally brand new, no discrepancies. This kit of course has the coil-on-plug conversion setup: Adapter plate (1), all four plug wires (4), grounding cable(1), all mounting hardware that came with the kit, and the spark plug wire keepers (2). I will be purchasing a silver set as soon as these sell, plus a bit more out of my pocket. This kit retails for $199.00 and up. Letting this kit go at a steal, --Lowered-- $155.00 Shipped --Lowered-- to US Lower 48.
PM Me if any additional pictures are needed.
Custom-fabricated dual steering column gauge pod
> I personally hand-crafted this piece for my own use. I have since taken up another project, making an LCD Panel, programming it, and having it as a digital read-out that will be mounted in this exact place, above the steering column. Selling this to otherwise fund that project, and have no use for it anymore anyways. The column has brown guts, and came out of a 2001 Mazda Protege ES. These models did not have the courtesy light located just above the ignition, but that has been fixed, and is ready to accept that courtesy light of yours. Secondly, the build thread for the pod can be found here. In total, this project took around 18 hours combined to complete, and as it sits it is ready for install. This is a ONE OFF PIECE. There are no fitment issues. The pod is currently textured and painted satin black, and is not clear coated. You have the option of sanding it down and making it smooth, or painting it any color you desire. You will receive the upper pod (1) and underbelly (1) that connects to it. I'm asking $100.00 Shipped to US Lower 48. PM Me if you need additional pictures, or have any other questions regarding this item.
Thanks for droppin' in and having a look!
(BLUE) Nology Hotwires Part# 011 364 256 , Mazda Protege Speed
NOTE: This kit is made for the Mazdaspeed Protege utilizing 2 Coil packs, and includes the Coil-on-plug conversion.
> Purchased this a couple months back originally going with blue for engine bay colors. Before I even opened it, I had changed my mind to black and silver. Contacted the retail seller of the item, and they said they were already being made, so no hope in changing it at that point. This kit was opened to get accurate pictures to post for sale. Has NEVER BEEN INSTALLED on any vehicle. This kit is quite literally brand new, no discrepancies. This kit of course has the coil-on-plug conversion setup: Adapter plate (1), all four plug wires (4), grounding cable(1), all mounting hardware that came with the kit, and the spark plug wire keepers (2). I will be purchasing a silver set as soon as these sell, plus a bit more out of my pocket. This kit retails for $199.00 and up. Letting this kit go at a steal, --Lowered-- $155.00 Shipped --Lowered-- to US Lower 48.
PM Me if any additional pictures are needed.
Custom-fabricated dual steering column gauge pod
> I personally hand-crafted this piece for my own use. I have since taken up another project, making an LCD Panel, programming it, and having it as a digital read-out that will be mounted in this exact place, above the steering column. Selling this to otherwise fund that project, and have no use for it anymore anyways. The column has brown guts, and came out of a 2001 Mazda Protege ES. These models did not have the courtesy light located just above the ignition, but that has been fixed, and is ready to accept that courtesy light of yours. Secondly, the build thread for the pod can be found here. In total, this project took around 18 hours combined to complete, and as it sits it is ready for install. This is a ONE OFF PIECE. There are no fitment issues. The pod is currently textured and painted satin black, and is not clear coated. You have the option of sanding it down and making it smooth, or painting it any color you desire. You will receive the upper pod (1) and underbelly (1) that connects to it. I'm asking $100.00 Shipped to US Lower 48. PM Me if you need additional pictures, or have any other questions regarding this item.
Thanks for droppin' in and having a look!
Last edited:
