Flutter After Boost Gauge Install.

[leakslikasieve]

hey guys,

so my issue is as follows. For over 1 year now i have been running the greddy type rs bov on recirc with no issues. on saturday i installed a prosport gauge and tee'd off the bpv line. since that i know have flutter. im not sure what the issue is. the only time i ever heard a small amount of flutter was under really low boost. now it happens even at full boost. you can hear it make the normal pssh, and then flutter. do i need to adjust my greddy? could it be that it needs to be adjusted because the boost is now being split in 2 directions so the greddy is seeing less or soimething? i also just tried to adjust the screw and it did nothing.

any help would be great.

thanks guys.

and just so you guys know. im talking about compressor surge flutter, but gauge flutter,

 

[amp]

borrow another greddy rs or aftermarket and see if you get the same results..

 

[leakslikasieve]

borrow another greddy rs or aftermarket and see if you get the same results..

i dont think i know anyone else running the greddy. the other thing is the bov didnt do it before the install, so i assumed it was something caused by the install. either the line i picked or something like that.