Finally, NEW INDASH KIT FOR MAZDA 3
- Thread starter yac2727
- Start date
http://www.msprotege.com/forum/showthread.php?t=73789
The top display part of the radio (in the fake cf strip) would be replaced by a pocket. When you get the kit installed please post pics! I am waiting to see somebody successfully purchase and install it..
The top display part of the radio (in the fake cf strip) would be replaced by a pocket. When you get the kit installed please post pics! I am waiting to see somebody successfully purchase and install it..
mazda3zoom
Member
- :
- Sweetest Car Ever
dont know if anybody really cares, but theres another site where u can get a dash kit for. its HZEmall.com then click the mazda3. it looks good but hes chargin a little too much to do it ($200) and your factory radio is all chopped up.
cloudycloud
Member
- :
- mazda 3 5door
I didn't see anywhere that the HZE guy was selling his service BUT who cares...
I mean I could just whip that fix up in a few minutes right?!?!!
looks easy enough!!! NOT!
looked pretty good, althrough I'd hate to lose my LCD display!
I mean I could just whip that fix up in a few minutes right?!?!!
looks easy enough!!! NOT!
looked pretty good, althrough I'd hate to lose my LCD display!
mazda3zoom
Member
- :
- Sweetest Car Ever
cloudycloud said:I didn't see anywhere that the HZE guy was selling his service BUT who cares...
I mean I could just whip that fix up in a few minutes right?!?!!
looks easy enough!!! NOT!
looked pretty good, althrough I'd hate to lose my LCD display!
i didnt see it anywhere either but i emailed him and he told me i could send it to him.
malebastard
Member
- :
- Mazda3 sp23
that metra kit doesn't incorporate the clock...
Here's a radio kit you won't see just anywhere, think $75 is expensive? I was quoted $500 to have this carbon fiber dash panel made, but said to hell with it, did some research and spent $55 in materials and 15 hours of labor (mostly sanding, sanding and more sanding) and made the damn thing myself. I took a flat sheet of ABS plastic, heated it and stretched it to fit the contoured lines of the stock radio, cut it to size, sanded, coated with a layer of two part epoxy, layered a sheet of 2x2 twill carbon fabric and brushed on two coats of polyester acrylic, sanded down to 2000 grit, completely cut apart the stock radio housing to preserve original mounting points (original LCD included in final install, though it is disconnected until I rewire the control board from the stock radio to drive it) and dropped in a Pioneer DEH-P9300 head unit. It's more work than most would attempt, but nothing ventured, nothing gained I always say... Let me know what you guys think.
Avery
2004 Mazda3s 5-door, Winning Blue, 5-speed
Mods: Cork-Sport blue LED interior lighting kit, Auto-EXE carbon fiber Ram-Air intake kit and brushed titanium shift knob (available through Japan only), Axela badge, Red Axela J-spec taillights, power folding J-spec Axela mirrors w/control switch, Mazdaspeed Circle-Earth ground kit, custom carbon fiber radio-dash panel holding a Pioneer DEH-P9300 receiver, Audiobahn 2400w 4ch to 4 sets of Infinity Perfect 5 1/4" component speakers, MA Audio 1200w Mono-bloc Amp to 3 Alumapro Alchemy 10" subs (sealed box).
Coming soon: Auto-EXE exhuast and header set, Auto-EXE full suspension system, Recaro seats, 18x8" Do-luck Double-Six rims.
Avery
2004 Mazda3s 5-door, Winning Blue, 5-speed
Mods: Cork-Sport blue LED interior lighting kit, Auto-EXE carbon fiber Ram-Air intake kit and brushed titanium shift knob (available through Japan only), Axela badge, Red Axela J-spec taillights, power folding J-spec Axela mirrors w/control switch, Mazdaspeed Circle-Earth ground kit, custom carbon fiber radio-dash panel holding a Pioneer DEH-P9300 receiver, Audiobahn 2400w 4ch to 4 sets of Infinity Perfect 5 1/4" component speakers, MA Audio 1200w Mono-bloc Amp to 3 Alumapro Alchemy 10" subs (sealed box).
Coming soon: Auto-EXE exhuast and header set, Auto-EXE full suspension system, Recaro seats, 18x8" Do-luck Double-Six rims.
Attachments
Looks like www.autotoys.com and a couple other sites have the dash kit for sale now. I have seen it for as low as 25+ shipping. Anyone else seen it for less?
willy65000
Member
pjo1966 said:
It'l do for now. At least until someone comes out with a kit that actually fits properly.
Installer.com
Has the Mazda 3 kits for $25.50 and something like $5.50 shipping. Decent price. I think they only take paypal for payment though.
Has the Mazda 3 kits for $25.50 and something like $5.50 shipping. Decent price. I think they only take paypal for payment though.
Last edited:
I ordered mine for $28.98 shipped from Pagan Car Audio I should have it in a few days. I'll be installing a Clarion VRX835 indash dvd player/monitor. I'll post pics of it as soon as it is installed.
