Fender roller

[MS3-oholic]

I am about to buy some Dunlop Direzza Sport Z1 Star Spec's in 235/40/18 and will need to roll my rear fenders. I am considering buying a fender rolling tool from tire rack to roll the fenders myself, an was wondering if any of the San Diego area MS3 owners were wanting to roll their fenders also. If there is enough interest in the area, I will buy the tool and roll your fenders for $60. Let me know if anyone is down for that.

 

[squabbin]

http://www.rollyourfender.com/


Just an FYI incase your interested. 60 bucks seems a bit high, you can rent the machine from here and do it for 50.

 

[slo03.5msp]

yeah well if that sounds high move to illinois they want 50 to 80 a fender!

 

[MS3-oholic]

http://www.rollyourfender.com/


Just an FYI incase your interested. 60 bucks seems a bit high, you can rent the machine from here and do it for 50.

You also have to pay shipping and insurance both ways and have to wait for the tool to show up. I can meet someone anywhere in the San Diego area which eliminates long wait times and any deposit ($250 from that site) for the tool.

 

[Young Roids]

I was looking on my MS3 and it looks like only the rears need doing. The fronts are rolled about as much as I can imagine they could be.

 

[Moxhair]

The Dunlop Direzza Sport Z1 tires are by far my favorites. Not alot of people know about them, but I plan to use them on my MS3. I had them on my Stage 3 SRT-4 and they held the power and made the car alot of fun to drive.

The StarSpecs are suppose to be even better.

 

[chipedout6]

im down dude, i have a 07 mazda 6, and my new 19s rub hard core in the back, om off on tuesdays, and if you can do it without f%*king it up, im down, ill even tip ya, dudes down here want like 75-100 a lip. and you gotta find someone to do it, most people are scared, so let me know, im serious, im in riverside county not to far from you...PLEASE SAVE MY TIRES!!!!!.....

 

[MSLou]

im running 235s with out my fenders rolled with no problems

 

[StealthWyvern]

im running 235s with out my fenders rolled with no problems

and whats the rest of the tire size?
Edit: Also rim offset and width?

 

[bacarl]

im running 235s with out my fenders rolled with no problems

Me too. 235/40-18 on a +48mm 8" wheel and stock suspension. I just checked the other day for any signs of rubbing and found none. Although I'm considering rolling the fenders anyway for the added safety factor.
(and yes I know I'm whoring up the suspension forum here, lol)

 

[Yoo Shin]

It'd be nice to roll them out for a 8.5" wide rim and the 235 or 245 tire. Doesn't seem like a single person has done this yet.

 

[Element]

It'd be nice to roll them out for a 8.5" wide rim and the 235 or 245 tire. Doesn't seem like a single person has done this yet.

I have 245/40/18s on my Speed3....

 

[xxxmonoxidechil]

yeah well if that sounds high move to illinois they want 50 to 80 a fender!

should have came out to the meet/BBQ last month. we had a fender roller here for it for that reason.

 

[lynx17]

Cobb fit a 255... makes me want to step up to STU.

 

[Yoo Shin]

I have 245/40/18s on my Speed3....

On a 8.5 wide? Pics?

Cobb fit a 255... makes me want to step up to STU.

That's what I hear and on a 8.5" wide GC05 Prodrive rim (offset?) I'd assume it's with theCobb springs.

 

[MSLou]

and whats the rest of the tire size?
Edit: Also rim offset and width?

stock rims im not to sure of the rest of the tire size and im a bit to lazy to go outside and check at the moment haha my bad

 

[ericrapp]

should have came out to the meet/BBQ last month. we had a fender roller here for it for that reason.

that is cool, how did it work out and what tools and method did you guys use!

 

[Eracer]

On a 8.5 wide? Pics?



That's what I hear and on a 8.5" wide GC05 Prodrive rim (offset?) I'd assume it's with theCobb springs.

they are not using Pro Drives anymore! Volk RE30 18x8.5 53mm offset, 255/40/18 rubber.

Also take into account that not all tires of the same size have the same width! Some run wider than others.