ddogg777 Thumper dyno numbers

[MPNick]

there already is a section for dyno files Nick its right here
http://www.msprotege.com/forum/forumdisplay.php?f=198

That is dyno sheets. I mean the file. This way you can use the free Dyno Jet software and see what the pull is under more then one standard. You can better compare what it what.

 

[tekkie]

you can attach files to the posts there, but right now the extension is probably blocked, what extension is it I will see if we can get that section changed to allow the files

edit. nevermind I downloaded the software its .drf files, I will make a suggestion to allow this

 

[MPNick]

you can attach files to the posts there, but right now the extension is probably blocked, what extension is it I will see if we can get that section changed to allow the files

edit. nevermind I downloaded the software its .drf files, I will make a suggestion to allow this

That great service and on a Sunday. Maybe more members and vendors will use it for now on.

Thanks for getting this done.

 

[rednecks_r_us]

Wow. Thats awesome.

I bet Duane is dancing in the streets to have his car back and running better than ever.

 

[vindication]

is that gt30 even in its efficiency range at 15psi? I'd like to see it at like +20psi

 

[Bigg Tim]

Great numbers there. But that sounds like an open exhaust to me, so that's no "real world" comparison either.

Who cares, it's cool to have more and more of these breaking 300whp at suck low HP! Lets see what 20 does in comparison tot he EVO's and STI's at 20.....no contest there! If I like my new tranny when it's done, I'll crank my boost up and play until she blows, then I too will be in the "cool" croud!!(thumb)

 

[LinuxRacr]

you can attach files to the posts there, but right now the extension is probably blocked, what extension is it I will see if we can get that section changed to allow the files

edit. nevermind I downloaded the software its .drf files, I will make a suggestion to allow this

Suggestion noted. In the meantime, you can zip the file, and post the zip file.

 

[Mental Addiction]

Great numbers there. But that sounds like an open exhaust to me, so that's no "real world" comparison either.

If you would have answered your phone I would have taken you for a ride.
Full exhaust and all.
The car has full 3" exhaust. What you hear is the WG opening(atmos. vent)

 

[funktownp5]

is that gt30 even in its efficiency range at 15psi? I'd like to see it at like +20psi

Actually he is in the 78% island of efficiency. Even if he turned the boost up

he still would be in the 72% range.

 

[mazdaspeed75]

What I meant to say is when is this turbo in it's efficiency range on the 2.0l. Whats the sweet spot? 330whp has been done at 15psi on a much smaller turbo and set-up.

Hopefully mid year i will be there or higher .

 

[Mental Addiction]

330whp has been done at 15psi on a much smaller turbo and set-up.

That's great. We didn't post these to show who's dick is bigger. Just showing what can be done.
ddogg777 has a GT3037 turbo. That has a 76.2mm w/ 56 trim compressor wheel.Good for 500HP.
The car you are referring to, didn't it run a GT25/40R or the 67mm compressor wheel?

 

[TurfBurn]

Nice stuff Beau! I'm hoping the new exhaust I'm working on right now (Bye bye AC ) will get me in that range... here's hoping!

Great GREAT stuff though... hope that trans holds up (or are you running GTX gears for good measure?)

 

[Mental Addiction]

Nice stuff Beau! I'm hoping the new exhaust I'm working on right now (Bye bye AC ) will get me in that range... here's hoping!

Great GREAT stuff though... hope that trans holds up (or are you running GTX gears for good measure?)

No he's not. Soon though. Still working though bugs as time permits.
Duane get's his car back today to tinker around and play with.

I am building a T4 turbo manifold for my P5. Looking to run a custom setup.

 

[TurfBurn]

Redline Shockproof??? I'm so far finding that fluid and cooling goes a long way to keeping her together... I'll see just how high it helps you too this summer when I get back on the road as long as I've finally mastered my boost issues.

Later!

Steve

 

[HiBoost TS]

Hey Duane,

Good to hear that your car is back and running. Good numbers! I still remember when you bought our turbo kit 2 years back and I still consider you our customer

 

[BlkZoomZoom]

That's great. We didn't post these to show who's dick is bigger. Just showing what can be done.
ddogg777 has a GT3037 turbo. That has a 76.2mm w/ 56 trim compressor wheel.Good for 500HP.
The car you are referring to, didn't it run a GT25/40R or the 67mm compressor wheel?

"What I meant to say is when is this turbo in it's efficiency range on the 2.0l. Whats the sweet spot? 330whp has been done at 15psi on a much smaller turbo and set-up."

When you take it out of context it does sound negative. Sorry if I offended anyone, I was just curious when the turbo was in it's sweet spot.<!-- / message --><!-- sig -->

 

[ddogg777]

Thanks Juan! I never thought boost would carry me this far. I'm jealous of your 3, those are amazing numbers!

 

[robp5t]

Nice work Beau and ddogg777. Curious to see what I am going to do at 20+ with methanol and water injection.

 

[AbsoluteSwed]

Nice stuff Beau! I'm hoping the new exhaust I'm working on right now (Bye bye AC ) will get me in that range...

I thought the AC was still fully functional on both thumper options and the sleeper kit. Or he is saying that his new exhaust will eliminate the AC?

 

[vindication]

duane, how many miles are on your p5? it seems it's been under the knife +90% of the time you've owned it. damn you are one patient mofo. even I'm bitting my nails and it even aint my car. hah