Custom Under the Radio Guage Panel

[boomergt]

Hey Guys, I had a local machine shop fabricate an under the radio panel to fit one 52mm Gauge and the Greddy TT and Profec II Spec B EBC. It is kind of similar to www.03msp.com but with some new modifications....

Check it out, and let me know what you think...

 

[boomergt]

Here are some more pics

 

[03BlkMicaSPD]

Looks good, like my "modified" 03msp panel. But It is nice. You should get a few of these and see if you can sell them, it is definetly easier to install. The cut at the top for the radio to fit down into was smart, that was the hardest part of installing mine. I had to cut mine away with a grinder to get it to fit like that.

 

[mspeed101]

Very nice and clean.

 

[www.03msp.com]

Hey Guys, I had a local machine shop fabricate an under the radio panel to fit one 52mm Gauge and the Greddy TT and Profec II Spec B EBC. It is kind of similar to www.03msp.com but with some new modifications....

Check it out, and let me know what you think...

Looks great, wish I had the www.03msp.com label on it though.

I'm back..................

 

[Brian MP5T]

Nice!

 

[CasopoliS]

Nice.
You should get quotes for bulk pricing from local fabricators.
QTY of 10, 20, 30+
The more you will commit too, the lower the price can get. It might not be much though. You could def sell some of these.

 

[poboxjosh]

Very nice indeed.

 

[www.03msp.com]

We're back - see my signature.

 

[slug420]

i see that you're back but you arent selling these bad boys are you?

 

[www.03msp.com]

i see that you're back but you arent selling these bad boys are you?

I would if I can get 20 people in on it.

 

[slug420]

ill work on that

 

[slug420]

can you make yours look as hot as 03BlkMicaSPD's? I really like that with the edge around it

And have you made one i can put a pic of in the gauging interest thread?

 

[Titanium]

man I got one of those gauge panels from 03msp.com and it was total crap. I still need to take it back out it get in to fit properly. The radio trim peice hits the top of the panel so it doesnt fit flush around the radio. So I think might either take some off the top of the panel or the trim ring for the radio(havnet decided yet). Plus the buttom is too long so it hits part of the climate control stuff and you can look down and see the climate control wiring and such. So I'm going to have to trim the bottum. One other thing I dont like about it that you can see the screws and the overly large holes for the screws. I havent come up with a plan on how that will be taken care of. But I'm stuck with it cause I had to cut the dash to hell to install it. It looks gheto as hell and when people ask me I tell them it was something I made myself and its still work in progress and I'm to embarrassed to say I payed money for it.

 

[www.03msp.com]

man I got one of those gauge panels from 03msp.com and it was total crap. I still need to take it back out it get in to fit properly. The radio trim peice hits the top of the panel so it doesnt fit flush around the radio. So I think might either take some off the top of the panel or the trim ring for the radio(havnet decided yet). Plus the buttom is too long so it hits part of the climate control stuff and you can look down and see the climate control wiring and such. So I'm going to have to trim the bottum. One other thing I dont like about it that you can see the screws and the overly large holes for the screws. I havent come up with a plan on how that will be taken care of. But I'm stuck with it cause I had to cut the dash to hell to install it. It looks gheto as hell and when people ask me I tell them it was something I made myself and its still work in progress and I'm to embarrassed to say I payed money for it.

It depends which one you bought. The M2G is a perfect install as well as the lastest version of the Z12. All the problems you listed had been reworked with these two recent products so that it turned into a better product with no issues.

However, we have not made any for six months and don't anticipate to unless someone requests it.

You may be right, the older ZLINE products was "custom" and NOT plug-and-play and was sold accordingly.

You can do searches on here regarding the latest Z12 with the three hole and tiny screw holes and or the M2G which is the 2-gauge holder with the artist rendition of the Mazda logo and tiny screw holes.

I haven't heard a single soul that was unhappy with them.

And just for reference, here is the M2G:

 

[Titanium]

well I bought one of those panels from you right before you went offline with your productions. I was thinking I was getting the latest and greatest. So, I guess I got one of the crappy old ones laying around and I thought I was getting the one that was reworked. Guess I got screwwed or short end of the stick or whatever. Thanks.

 

[slug420]

can you make yours look as hot as 03BlkMicaSPD's? I really like that with the edge around it

And have you made one i can put a pic of in the gauging interest thread?

.....

 

[Titanium]

It depends which one you bought. The M2G is a perfect install as well as the lastest version of the Z12. All the problems you listed had been reworked with these two recent products so that it turned into a better product with no issues.

However, we have not made any for six months and don't anticipate to unless someone requests it.

You may be right, the older ZLINE products was "custom" and NOT plug-and-play and was sold accordingly.

You can do searches on here regarding the latest Z12 with the three hole and tiny screw holes and or the M2G which is the 2-gauge holder with the artist rendition of the Mazda logo and tiny screw holes.

I haven't heard a single soul that was unhappy with them.

ok heres the thread you posted and I posted in saying I had just placed an order for one of the 5 remaining panels. YOU would think I would have gotten the latest version that you said corrected the problems that I discrided. I was tihnking the same thing. Either your products still suck from the first run or you screwwed me and set me one of the pos's from the first run.

http://www.msprotege.com/forum/showthread.php?t=85208

 

[www.03msp.com]

ok heres the thread you posted and I posted in saying I had just placed an order for one of the 5 remaining panels. YOU would think I would have gotten the latest version that you said corrected the problems that I discrided. I was tihnking the same thing. Either your products still suck from the first run or you screwwed me and set me one of the pos's from the first run.

http://www.msprotege.com/forum/showthread.php?t=85208

We did the redesign after the last GB. A few locals picked this small batch up as well as a few PM's to me over the last few months of remaining new Z12's.

Anyway, sorry to have you pissed, I guess we can't make everyone happy.

Brian

 

[Metal MP5]

what brand gauges is that ? (the Volts one) i want blue gauges