coil change info
- Thread starter rae rae
- Start date
tweety2300
Member
- :
- 2001 mazda protege mp3
If its the ignition coils there's 4 10mm bolts holding the black plastic thing. you will see the coil packs they're held on each by 2 10 mm bolts total of 4. All in all take 10 minutes from start to finish
As stated before....
1. Unplug the wires and connectors attached to the coil packs
2. Remove the 4 10mm bolts that hold down the coils ( only two coils as you see ).
3. Pull the coil packs up off the cover.
4. Assemble in reverse order.
10 minutes tops as stated before.
1. Unplug the wires and connectors attached to the coil packs
2. Remove the 4 10mm bolts that hold down the coils ( only two coils as you see ).
3. Pull the coil packs up off the cover.
4. Assemble in reverse order.
10 minutes tops as stated before.
Last edited:
