CDFP Internals Install

[scatt nasty]

Im currently doing the upgraded internals install, and in the beginning you have to disable one of the relays that supposedly says "circuit" on it.. Either I am friggen blind or mine doesn't say it on there. Anyone know how to find this or know the consequences of removing the pump without disabling this ?

 

[LBV]

I never pulled my fuse/relay ... had some fuel spill but nothing large. Just make sure the engine isn't hot of course.

When you go to re-start the car, turn the ignition to on without starting the car a couple of times to let the pump prime the lines.

I'm gonna try and attach the best instructions I've seen for what to do to the pump AFTER it's out.

 

[aaronc7]

pull off the cover on the fuse box thing under the hood. on the bottom of the cover you pulled off it will label the right one as CIRCUIT. pull that relay out and start the car and let it idle...it will die in about 10 seconds. not begin the FP uninstall :-D

 

[Speed3Rookie]

If the car is cold like mine was when I did the install you can just remove the pump and you will loose minimal fuel.