BT build advice please.

[Zai_MS3]

Hey guys,


My car stock made 207whp and ran 14.8 at qmile

My old setup was Wildcat DP, Powerflow Exhaust, MCM intake and UNI.Q.
Car made 234whp on Dastek
This was stock turbo running 15.9psi. she made higher numbers on other dynos, but this doesnt matter, as i dont trust them....with just the Dp on one dyno I made 228whp
Didnt manage to get times as I broke 1st gear.


So on the shopping list :

Goodies from CP-e
TIP.
Execel Nano intake
FMIC
HKS BOV and Flange
Motor Mount
TBexhaust (using the old DP)
CP-e pistons and Rods,
CP-E standback
Piasini Flash (only cos I have to)

Already on is the Garret t3/t4, 3071 spec.
at 1.4 bar I am hoping to get 330ish on the wheels.

I also did the box, new tie rod ends, new control arms, new GT series brakes and pads, and the stabiliser bar at the back , just to be safe!!!

any fedback from the BT guys, or advice?

 

[anm6]

For a turbo dont waste the $$ if you only want 330sih. There are guys here that make that on the stocker. Just need to fully bolted and have a tuning. I made 284 WHP and 291 WTQ with the wrong intake tune and hot humid weather.. When I go back with the right intake MAP, I should be over 300 WHP..

 

[Zai_MS3]

sorry forgot to convert KW to HP.
should be closer to 400WHP with that setup.