Boost guage setup...
- Thread starter VRMS6
- Start date
and what about the A/C?
got the two on the side besides i hate runnin a/c anyways
Mazdaspeedguy
Member
Here is mine
Powerslave
Banned
- :
- mps 3
Here is mine
this is the best look at the a/f guage, sweeeet
Here is mine
Any info on the center guage setup?? Parts usedfor the trim ring,guage size?? Write up on install???
baseballd2
Member
- :
- mazdaspeed6
How does the air to fuel ratio gauge get hooked up, into the ecu? or off the maf sensor or something ?
Mazdaspeedguy
Member
Gauge size is 52mm hence the ring around the outside. I had my shop install it for me they made up the custom ring around it. The AFG gets hooked to a separate wide band o2 sensor in my DP. I had to have an extra bung welded on to it for this to work.
mrlilguy157
Member
- :
- 07 mazdaspeed 3
gorgeous.
Mazdaspeedguy
Member
I will post my shops contact info for those interested.
My name is Rob mention the AFR ring:
Jackson AutoSport
Phone 204-235-1123
jacsport@jacsport.com
My name is Rob mention the AFR ring:
Jackson AutoSport
Phone 204-235-1123
jacsport@jacsport.com
Rob
Spoke to your installer and he says he will need your car there to get measurements off yours. He says your car will be there for other installs in the next few days and he will get measurements then... He may make more than one if there is sufficient intrest from other MZ6/MS6 owners....
Spoke to your installer and he says he will need your car there to get measurements off yours. He says your car will be there for other installs in the next few days and he will get measurements then... He may make more than one if there is sufficient intrest from other MZ6/MS6 owners....
