Anyone need any parts???

[infrared5]

I recently blew my stock FS-DE, and finally got my new one in. But now I have a motor sitting in my garage with alot of good parts on it. Does anyone need anything? Please let me know and I can setup an ebay auction for your part. I also have the capability to powdercoat in my garage, so if you want I can coat parts as well. You can check out the current auction for the intake manifold on ebay at
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905162137

Ive been coating for about two years now, and currently coat for a shop here in town. You can view my new powdercoated motor at
http://www.cardomain.com/id/adzamp5

I blew a hole in the block (old motor), so its no good, but I still have 3 pistons, rods & rings, crank, intake and exhaust cams w/ cam gears, sensors, valves, timing belt, head, pulleys, throttle body, coil packs w/ plug wires, fuel rail, etc. I also have a set of front struts with ground control spring perchs installed (only perchs), stock springs, top and bottom grills, stock clutch, flywheel, etc. If you need something let me know, ive got way too much to list, so just ask.

 

[Protege5Gurly]

Dibs on the valve cover and fuel rail

Pe@ce

 

[Protege5Gurly]

Might take that manifold off ur hands as well

Pe@ce

 

[SpicyMchaggis]

how did you blow it?

 

[protegeV]

how did you blow it?

(mswerd) why'd she pop?

 

[ChuEy826]

i believe he was the guy using NOS a lot... drykit..

 

[protegeV]

i believe he was the guy using NOS a lot... drykit..

(encourage

 

[infrared5]

nope, it was wet. But the jet got twisted up and was spraying straight back into the manifold, so all the nitrous was going into cylinder one. It melted the plug, shattered the piston, twisted the rod, and put a hole in the cylinder wall and the block. Sh!t happens! If anyone wants something, give me a definate yes, and I'll put it on ebay.

Its hard to avoid this problem with the way our intakes bend so sharp before the throttle body, I would reccomend direct port in the future. just my $.02

 

[akhilleus]

very interesting.....

 

[infrared5]

What color would you like the fuel rail? If anyone wants something powdercoated, I'll need a few days to get it cleaned and coated.

 

[Protege5Gurly]

Doesnt have to be colored ... its getting chrome plated.

Pe@ce

 

[Protege5Gurly]

Also, does it have to go on ebay? Cant I just pay you direct? Ebay kinda defeats the purpose since it will allow others to bid on it?

Pe@ce

 

[bazooka joe]

i'll second on the valve cover if protege5gurly backs out.

 

[akhilleus]

I want the throttle body

 

[infrared5]

Ok, the valve cover is already powdercoated, its the silver one with mazda logos in the pics on my cardomain site (it can be stripped if you want). The throttle body is the one that came with the salvaged motor, so its not as clean as the other parts. Its got some splotches on the metal but that could be cleaned off. I took the throttle body apart the other day to prep it for powdercoat, so its just the actual metal body now. The black sensor on top of the throttle body (black cylinder) was broken, but everything else will come with it.

 

[PMPJUICE25]

What Kind Of Intake Do You Have On That Baby?

 

[infrared5]

Ok, heres the first batch on ebay:

chrome intake manifold
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905162137&sspagename=STRK%3AMESE%3AIT&rd=1

coil packs and plug wires
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905911058&sspagename=STRK%3AMESE%3AIT&rd=1

cd player
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905911774&sspagename=STRK%3AMESE%3AIT&rd=1

crank pulley
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905912325&sspagename=STRK%3AMESE%3AIT&rd=1

exhaust manifold
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905912976&sspagename=STRK%3AMESE%3AIT&rd=1

fuel rail
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905914187&sspagename=STRK%3AMESE%3AIT&rd=1

oil pan
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905914863&sspagename=STRK%3AMESE%3AIT&rd=1

struts with ground contol perches
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905915543&sspagename=STRK%3AMESE%3AIT&rd=1

throttle body
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905918256&sspagename=STRK%3AMESE%3AIT&rd=1

valve cover
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=7905917042&sspagename=STRK%3AMESE%3AIT&rd=1

 

[infrared5]

The intake is a Ingen CAI (annodized red), but its not for sale (sorry).

 

[flat_black]

Hmmmmm... How about the head? How much do you want for that? Was it damaged at all when the whole shebang went kaput?

 

[infrared5]

Yeah, the head got pretty jacked up, the bottom side looks like someone took a jackhammer to cylinder one. I really dont think you want the complete head, but if you want any of the guts (valves, springs, etc) let me know. I almost bought a valve spring compressor the other day to start taking it apart, but didnt. I'll give the head a hard look tomorrow to see what I'm gonna do with it. But im not gonna sell someone a junk head.