monsoon725
Member
- :
- 06 Speed6 GT
Hmm did I miss something in my brief reading of the 11 pages that there is a fitment issue with the 06 6?
ALL 2.3 DZR speeds Want a TMIC
- Thread starter azmavhockey3
- Start date
monsoon725
Member
- :
- 06 Speed6 GT
Fixed....down to 5!
did you see that cp-e now is selling their TMIC (3.25, polished) for $350? dun dun dunnnn. I'm sticking with CS in hopes that the cast endtanks will negate the additional .25 of core size lol. plus i like that we can use the OEM shroud. The less attention I get at the dealership the better haha.
Edit: I stand corrected. cp-e is cast as well. =/
http://www.cp-e.com/product/cp-e%E2%84%A2-mzr-23-disi-top-mount-intercooler
so now it looks like the only benefit (not counting any actual numbers that either piece provides) to the CS piece is that it's $50 cheaper and you can use the factory shroud...I am really on the fence now...
Edit: I stand corrected. cp-e is cast as well. =/
http://www.cp-e.com/product/cp-e%E2%84%A2-mzr-23-disi-top-mount-intercooler
so now it looks like the only benefit (not counting any actual numbers that either piece provides) to the CS piece is that it's $50 cheaper and you can use the factory shroud...I am really on the fence now...
Last edited:
So far, so good. Consistent temps from the corksport TMIC. Personally i'm curious as to how fast the CS TMIC sheds heat once soaked. As in, sitting in the staging lanes for a drag race with the motor running. The TMIC is just soakin up heat. Don't know how one would measure this.
So, what is the total cost if you made the deposit. 249 or 299?
So, what is the total cost if you made the deposit. 249 or 299?
zweetdreamz
Member
Is the end product gonna be black? And how long do I have to jump on the $50 deposit.
I am curious to this as well; especially now that there is the $50 option for the laser etching...
needforspeed6
Member
- :
- 07 Mazdaspeed 6
I asked the same question to Corksport and they said the $50 deposit goes toward the purchase price of $299, that is, if you put down a $50 deposit you owe $249 when it is released in March.
There is not a laser etched option. There is an option to add a laser cut aluminum shroud if you do not want to use the OEM shroud.
Also, we test fit the TMIC on a CX-7 today. The pics below show the factory vent shroud sealing with the TMIC. For the CX-7, you will have to use the OEM shroud because it is required for airflow to make it to the IC.
As far as anodizing, we are still looking into color offerings. Most likely only black, red, and blue (same as our MAF housing colors). However, we don't have that on the site yet, because we are still working on a final price for this. Your deposit still holds a TMIC regardless of finish though.
Also, we test fit the TMIC on a CX-7 today. The pics below show the factory vent shroud sealing with the TMIC. For the CX-7, you will have to use the OEM shroud because it is required for airflow to make it to the IC.
As far as anodizing, we are still looking into color offerings. Most likely only black, red, and blue (same as our MAF housing colors). However, we don't have that on the site yet, because we are still working on a final price for this. Your deposit still holds a TMIC regardless of finish though.
