7" Instrument cluster language change? 2020 CX-5

[AG16]

Hello,
I have a mazda cx5 2020 with the new type instrument cluster which has the 7" multifunctional screen. The problem is when the language changes from japanese to english using forscan, when you drive the vehicle the head up display shows different value in relation to the speedometer. For example if you driving and the speedo shows 50 km/h the hud shows 76 km/h. Has anyone faced anything like that? Any inputs are welcome

I would like to mention that on the previous type of instrument cluster with the 4" screen there is no problem like that.

 

[cornerking]

hmm, sounds like a software glitch. Have you tried changing the language back to Japanese to see if it fixes it? might be worth a shot. could be a bug in the English firmware maybe?

 

[gobroncos]

Are you sure you don’t have the speedo set to show Miles per hour? 50 mph is approximately 76 km/h.

 

[AG16]

hmm, sounds like a software glitch. Have you tried changing the language back to Japanese to see if it fixes it? might be worth a shot. could be a bug in the English firmware maybe?

Yes i have tried changing the language back to japanese and the problem goes away. Probably a firmware issue.

Are you sure you don’t have the speedo set to show Miles per hour? 50 mph is approximately 76 km/h.

The speedo is set to km/h. The only difference i noticed is when the japanese language is set the speedo max value is 180 km/h and when is set to english the max value is 240 km/h if i remember correctly. So the program it does changes the language region but there is the error with the speed difference