If you move the turn signal bar down (or up) without actually latching it, the turns signals will flash three times and then switch off. Useful and easy for lane changes.
This has been common in cars in Europe for many years, but haven't seen it much over here (US) yet.
I hated this feature. When I would use this feature it was confusing I would press the arm up and hold it until I finished changing lanes then it would continue to flash.
I would then move the arm the other way and it flashed 3 time the other way.
It'll operate like any other turn signal. It'll turn off after you move it back from full up/down to neutral/center. The one tap 3 blinks is for lane changes. I luv it. I forget on Mondays in my speed6 after driving wife's CX-5 on the weekend.What happens if you move the lever fully and manually and move it back to the neutral position?
I will have to try this option again to verify why I did not like it.
I will give it another try.
I think that is what I did not like. Once you activate the "3 flash Lane change" flash how do you cancel it?
Since the lever is already in the center position. I think I would naturally push it in the opposite direction like on a regular turn signal and start the 3-Flashes in the opposite direction.
Probably just need to get use to it so I do not over correct the signal.