2003.5 Custom Fog Light Kit

Status
Not open for further replies.
I posted a link to the pic.

http://home.comcast.net/~c.savino/mycar/switch.jpg

It fits on the blank near the dimmer, or where ever else you want to put it.

The direction are a joke, you don't need them....it's so easy it's not even funny, everything clips into everything else, there's nothing to really wire, 2 grounds, one constant, one switched wire, that's it, you don't even have to wire the relay, it's all done for you!

WAYYYYYYYYYYYYYYYYYYYyyyy easy.
 
II-Savy said:
I posted a link to the pic.

http://home.comcast.net/~c.savino/mycar/switch.jpg

It fits on the blank near the dimmer, or where ever else you want to put it.

The direction are a joke, you don't need them....it's so easy it's not even funny, everything clips into everything else, there's nothing to really wire, 2 grounds, one constant, one switched wire, that's it, you don't even have to wire the relay, it's all done for you!

WAYYYYYYYYYYYYYYYYYYYyyyy easy.

Guys, I'd show you pics of how I do wiring - though I utilize my skillz so you don't see it! Remember, I bench prep all my harness's and wrap electrical tape over everything (except the relay and contact points) and hide it all! My six and a half year old daughter figured out the wiring (no kidding). She just asked what color red was, black was, and white (+12V,Ground,+12V Switched).

HOLY COW - 400 POSTS IN THIS THREAD!

As of right now, 3 sets left for the 5" Halo's. C'mon guys, buy them so I can ship em' all out at one time!
 
Yea zmzmp5 is right, there is not thought involved, you take the whole wire harness and just put it in. The only thing you have to do is extend the wires going to the switch. It's really that simple.
 
II-Savy said:
Yea zmzmp5 is right, there is not thought involved, you take the whole wire harness and just put it in. The only thing you have to do is extend the wires going to the switch. It's really that simple.

Will rain water damage the electrical system? how is it water-proofed? I am fairly good with wiring. I have a Eng. degree :)

last question what kind of mounting brace do i get the G3 right?
 
noclue119 said:
Will rain water damage the electrical system? how is it water-proofed? I am fairly good with wiring. I have a Eng. degree :)

last question what kind of mounting brace do i get the G3 right?

The wire harness is factory made by Pilot and should be all set for weather problems and water. Seems like if you had an eng. degree you won't be asking about water and the "electrical system". It's all under the hood. Inaddition I have already taken my car through a touchless car wash.

I think you will get a GENIII IF you get the big lights....right Brian?
 
n/m u didn't understand my question. fyi water is not always short out ur electrical system. How do u think a subs lunches its payload in water. but that is not the point. I was trying to see if anyone can show me what the wiring harness connections look like. thx
 
They are all nice factory spec connectors. The ones at the light are plastic clip in style. The power connectors are ring style. I don't have that setup on mine because the tech wired the power into the fuse box in the engine bay. I would always recommend using Dielectric (sp?) Grease on all connectors for protection against moisture and corrosion. You won't be unhappy with them, they are top-notch. (boom07)
 
kevducridr said:
They are all nice factory spec connectors. The ones at the light are plastic clip in style. The power connectors are ring style. I don't have that setup on mine because the tech wired the power into the fuse box in the engine bay. I would always recommend using Dielectric (sp?) Grease on all connectors for protection against moisture and corrosion. You won't be unhappy with them, they are top-notch. (boom07)


I wired the power ...aka fused wire right to where Mazda added our amps power off the main fuse box. It's covered, it's brass I think and there is a tiny bit of heat shrink on it. Even a light power wash under the hood would be fine. The connectors are penis/vagina type and some are 3 or 4 pin snap in style connectors. Wait....did I just say penis? (hah)
 
^^^classic.."who you talkin to?"
"myself"

i'm ready to order, as soon as someone lets me know whether or not the ones i would be receiving will be more centered or "aimable"
 
goku4658 said:
^^^classic.."who you talkin to?"
"myself"

i'm ready to order, as soon as someone lets me know whether or not the ones i would be receiving will be more centered or "aimable"


YES, THEY WILL BE CENTERED PERFECTLY (DOING THEM TONIGHT) AND ADJUSTABLE UP/DOWN.
 
Here are the switch and wiring pics as promised.

This first pic is just to show the LED's in the dark. Yeah, II-savy I know it sucks.

aaj.jpg


aak.jpg


aal.jpg


aam.jpg
 
Last edited:
Hey Brian, is Paypal your only method of payment? I feel kinda queasy with online stuff..... (dunno) Also has any other Canadian ordered?
 
II-savy, now that is comedy. (rofl2) For god sakes, there is no difference between my night pics with flash and that daylight shot. (drunk) What did you think of my mounting spot? You can still see the LED's for the switches but not the switch body. :cool:

Hey Brian, is Paypal your only method of payment? I feel kinda queasy with online stuff..... Also has any other Canadian ordered?

Yes he takes paypal, ships insured and you get the product via USPS. Come on guys, buy the lights, they are very nice. :cool:
 
kevducridr said:
Come on guys, buy the lights, they are very nice. :cool:


selling under pressure, eh? I'll probably order later on today...right now it's three in the morning, i just woke up (cause the g/f works at 4) and my head is going (rofl) , minus the laughing part....
 
Status
Not open for further replies.
Back