1.6 turbo...

[THEGOLDPRO]

i wouldent worry about it, its only gonna help this d0od figure tings out, lol

 

[Shane5425]

lol, ok then lets chat..

i am gonna be gettin his vortec 12:1 running 5-6 psi max, top mount intercooler.. very short piping.. so i am hoping for very little lag..

 

[THEGOLDPRO]

well if i was you, i would get a front mount, like danny and i, he has the same front mount i have, i talked him into it, its a toyota supra one,

secondly if you just wanna run like 5-6 psi then i would just go with some used miata inectors they are like 230cc, which is much better then the stock 155cc crap, the stock ones are good for like 4psi, the miata ones you could prolly pull 8-10psi safely, i ran the miata ones for a while, and they worked fine.

i just have a turbo xs single stage boost controller

 

[Shane5425]

cool, ill look into some miata injectors.. i am gonna run the top mount for now, since i already have it, i might change it later, i think the turbo is set for 5-6psi got to double check with danny,
i got a turbo xs rfl bov comming for it, what bov are you using?

 

[THEGOLDPRO]

cool, ill look into some miata injectors.. i am gonna run the top mount for now, since i already have it, i might change it later, i think the turbo is set for 5-6psi got to double check with danny,
i got a turbo xs rfl bov comming for it, what bov are you using?

i have an HKS SSQV, when looking for the miata ones make sure they are for the 1.8 litre, those are the 230cc ones, the 1.6 litre ones are smaller.

 

[Shane5425]

ok, 1.8l miata injectors..
what about oil feed lines, am i gonna have to get it from where the oil pressure sensor unit is??

 

[THEGOLDPRO]

ok, 1.8l miata injectors..
what about oil feed lines, am i gonna have to get it from where the oil pressure sensor unit is??

thats where mine is, and it works fine. i cant remember where i got my lines from, but it was easy to do.

 

[Shane5425]

http://cgi.ebay.com/ebaymotors/Mazda-Miata-230cc-99-00-injectors-195500-3310-13-8-ohm_W0QQcmdZViewItemQQcategoryZ33554QQitemZ8047430575QQrdZ1QQsspagenameZWDVW

look like them..


cool, ill go from there, i guess ill have to rig up some kind of block to put the oil pressure unit pluged in too..

 

[THEGOLDPRO]

those will work, i was looking at those earlier, lol

 

[THEGOLDPRO]

and when i ran my oil feed line i just used a brass T and pluged the oil feel into one side, and the oil pressure censor into the other side.

 

[Shane5425]

and when i ran my oil feed line i just used a brass T and pluged the oil feel into one side, and the oil pressure censor into the other side.

simple.. i like.. about what size tubing u recommend for the oil line... ??

btw, i appreciate all the help..

 

[TampaSport20]

ok, 1.8l miata injectors..
what about oil feed lines, am i gonna have to get it from where the oil pressure sensor unit is??

I told you before Shane..get the kit from tunertoys.com....they have the steel braided oil feed and return lines, oil fittings for the T-25 and the block to put the oil pressure sensor back into,and the fitting that taps into the pan...it's all in a kit for like $85...you will NOT find it cheaper....

ARGHHHH I am getting so antsy...I have EVERYTHING on mine except the downpipe and turbo manifold from juan....I already have my T-25,Oil and water lines,12:1 FMU,MX-6 GT injectors,intercooler piping, bpv,intercooler,and a MBC

Heavy duty clutch is installed and broken in

I even have a new cat-back from Thunder otw too

WHERE'S MY PICS AT GOLD ??

 

[THEGOLDPRO]

simple.. i like.. about what size tubing u recommend for the oil line... ??

btw, i appreciate all the help..

ummmm i dont know the exact size, but if you do a search for turbo feed lines they are all about the same size, give or take. no problem man, ask away, if i know the answer ill help out.

 

[THEGOLDPRO]

its nice to see that more and more 1.6ers are going the way of turbo!

 

[Shane5425]

so here is my fuel grocery list
1.8l miata injectors

oil list

T fiting
Oil line kit..
how do i tap the oil pan, weld a fitting in or are there some kind of bolt on type fitting?

still need to buy the bov.. but have the adapter already..

boost guage and air/fuel gauge are a must right?
things i have. or are on there way

turbo
mani
downpipe
all pipeing
intercooler
bov adapter

 

[TampaSport20]

...the waiting is driving me insane now....

narrowband a/f guages are worthless

don't want to spend money on a wideband ?? get an EGT guage

 

[Shane5425]

killin you... i still have to wait till end of april, begining of may to install all this.. i have to do it once college isout.. girl uses my car to get to school and back, plus dannys stuff isnt bieng sent till the 1st of april.. i have to sit and look at it for about.... 1 to 2 months before i can install.. it...

whats a good wideban to run?/

 

[Shane5425]

I told you before Shane..get the kit from tunertoys.com....they have the steel braided oil feed and return lines, oil fittings for the T-25 and the block to put the oil pressure sensor back into,and the fitting that taps into the pan...it's all in a kit for like $85...you will NOT find it cheaper....

ARGHHHH I am getting so antsy...I have EVERYTHING on mine except the downpipe and turbo manifold from juan....I already have my T-25,Oil and water lines,12:1 FMU,MX-6 GT injectors,intercooler piping, bpv,intercooler,and a MBC

Heavy duty clutch is installed and broken in

I even have a new cat-back from Thunder otw too

WHERE'S MY PICS AT GOLD ??

i looked on that site, didnt see the kit, ill look again, i am prolly blind... lol

i see why ur gettin ansty, ur in the same boat i am, when do u expect to install??

 

[TampaSport20]

i looked on that site, didnt see the kit, ill look again, i am prolly blind... lol

i see why ur gettin ansty, ur in the same boat i am, when do u expect to install??

http://tunertoys.zoovy.com/product/OLK38

as soon as I get my downpipe and manifold from Juan at hiboost...according to him they are on the way

 

[Shane5425]

thanx for the link.. adding to the list now.. injectors, oil line kit, bov, and guages.. should be set..