Search results

^indeed. Best looking Speed6 I've seen in a long time.

Just wondering before I decide on purchasing, if I have a 16x8 +40 wheel would I be able to fit 5mm spacers in the front and 3mm in the back and not have to run extended studs? Fenders will be rolled.

I've had this nasty clunk coming from the front right end. It almost sounds like thick metal on metal contact. I checked for the obvious first it being the endlink, which was still on very tight, and no play as well as no leak, I checked the ball joint and that seems okay, no play when I rock...

m3 rear diff group buy, anyone? (rlaugh)

(iagree)

1.) _Sloteg_ 2.) dacquesta1 3.) IggyPop 4.) BlkWidow(depending on cost) 5.) Ricktalife 6.) Satyr36 7.) Disturbedfan121 8.) ucMP3 9.)Patrickenator pending $ 10.) twistiert 11.) XxaltezzaxX 12) speedpx 13) HKPRO5 14.)mazdaspeedp 15.) Bluemica3.5 (depending on Price) 16) deadstock (depending on...

Assuming after you bled the brakes, you tightened the bleeder valves on all calipers? After you found out that your brakes don't work have you checked for any leaks around each caliper? If there weren't, there could still be air in the brake lines or the master cylinder could be toast?

bump. Anyone have one they want to get rid of? Even an mp3 axleback will do just fine. Just pm me.

Or if someone has an RB axleback or someone willing to part out their catback (anything but the 03.5) then please let me know. Thanks

I'm looking for an 03' only (round tip) msp oem axleback. Let me know if you have one or willing to part out and I shall pay. Thanks

One known recall I believe are the vtcs screws in the intake mani coming loose. Basically the screws that hold "butterfly" valves in the manifold may come loose and get sucked into the engine. I'm not too sure which VINs were affected. Maybe someone can shed some light on that. Regarding price...

No because it's made for manuals only, as MattV said in his post above.

Yup it uses a standard antenna plug.

Yeah that's exactly what I felt too, even with the clutch fully pressed in. It happens sometimes but not all the time. Other than that though, the car drives really nice. Weird?

Thanks for the heads up. I'll definitely bring that up with the salesperson.

So I test drove a speed6 overnight and I gotta say it drives very well. It has 32,000kms or just under 20,000mi but I have a few concerns. From a dead stop if i put the car into 1st, I feel a really faint "thud", as if the 1st gear is somewhat overweight. Secondly, when I'm cruising along, I...

Depending on what you're actually going to hook up, you can tap into the radio harness. Blue/Red wire is your +12 Black is your ground As usual, always test your wires before you tap into them.

I just wanted to make sure that I can take a lens off a sedan headlamp and fit it to my P5 headlamp? I just want to get a second opinion before I buy a headlamp. Thanks

They look stock. Maybe the tire iron doesnt fit through the openings since it's quite deep? A breaker bar and a 21mm socket should work too.