Search results

how did you know your mount was bad ? Did it break, I ask because I have evidence of fluid coming out of mine and I am considering replacing it

01 Protege P0300 code I have an 01 and the CEL came on twice in the past month, pulled up P0300 codes as well.. I cleaned the EGR and check resistance on the wires and coils, checks out fine..Any ideas on the next step to take

I am applying raamat to my doors and wanted to know what most guys did with the inner door skin openings, seal it with plastic ? Buy alumin sheetmetal and screw it into place then apply deadining over it? I have a 2002 protege and there are 4 holes that need this addressed.

Does anyone know how to fix the switch without swapping it,does a resistor need to be soldered on the control board ??

I can do 60.00 shipped on the orion 2 x 80 watts..clean amp sounds great..

Amps I have a couple amps if your interested.An ARC 600.4 100 watts x 4 or 300 x 2(for subs)These amps are designed by Zapco engineers ..good stuff.I also have an Orion old school 280 gx 2 x 80 ...Both amps have great sound quality.The Arc is Brand new,never used..

Just wanted to know if anyone used there products,Im looking to get bat terminals,anl fuse block and a second pair of rca's and they seemed inexpensive.But are they decent products??

Found it ,I was getting an intermittent connection on the ebrake,just tightened it a bit and its fine

Just installed this last week,was working fine,now my 01 Protege wont go into resrvation mode..checked all connections(all were soldered). Any ideas??

Just looking for suggestions on RCA's I have a pair of Stinger hypers but I need another set,will the more expensive RCA's have an audible difference??

Anyone have a ballpark range,I have 2 10 idq's in a sealed enlose in trunk,Arc acs 6.5 mids with tweets up front going to actively crossover the system with an Audio Control 4 xs,so I have to make the chips...mids are going in the doors..tweets either in kick panel or A pillar(anyone have...

Front speakers What is your budget,if you can go with 6.5 components powered by an amp........

What is the ebrake wire ,same as the brake wire on the 01 protege??

what leds did you use,some are single led ,6led ,9 led for the dash illumination??

I plan on installing a Compustar 2w900FM-AS in my 5 spd 2001 protege,just wondering how many additional relays do I need to purchase,and if they would be spdt,or diferent.. And besides for the power door lock/unlock were else are they needed?? Thanks

I removed the glove box and can see the metal release bracket,does that bracket itself come out??or does it remain behind the dash??Is a metal sleeve left in the car once the radio slides out??Im ready to take a hammer to it...lol

I am having problems removing HU I am having problems removing HU,the right side does not want to come out