Search results

question, how in the world did you get your mazdaspeed lip on i swear mine refuses to go back on

Sound clip please

well I look forward to it

I must say I like your build thread and I am impressed with your coil pack conversion, so far how much has that run you and how complicated was it?

Ebay

Do you remember the bolt specs you bought

For the mani and tb?

Last question, how do you install these what I mean is, is it intake manifold gasket-thermal spacer-intake manifold gasket or thermal spacer-intake manifold gasket.....I literally completely forgot how it goes

do the spacers require longer studs?

try swapping your ballasts around and see if it gets darker on the other side, usually when one hid is darker than the other its a sign of a ballast about to go out

start here, when the engine warms up the rubber becomes soft and when you accelerate you literally pull the crack open ever so slightly.

Rear Engine mount?

I figured as much for some reason I had it in my mind that they were different because they both had different thermostat housings (one straight and the other looks like an elbow).

just wondering if there is a difference between the mazdaspeed protege thermostat and the p5 one

sure wish i came close to 20mpgs city :(

i think you should def get it scanned first even after you reset the ecu it will still store the code (ask me how i know lol) but it looks like the sensors are connected to 2 different solenoids on the mani, one i assume has a 1 way check valve) but imma take a guess and say maybe some dirt or...

let me go take a quick pic of mine because i believe they are linked to the intake mani....brb

hmmm im gonna say that may be your problem, it could also be a bad sensor, i assume you have no cel, maybe run a scanner and see if you have any codes that wont cause a cel, i had the same problem i replaced both of those sensors and never had a problem ever again, i believe the stored code was...

its supposed to keep the throttle plate from sticking in cold weather, i bypassed mine and use that line for my coolant temp sender, take a quick look at the passneger side of your intake manifold, there should be 2 sensors that look exactly the same right above the mani

whats broken off is the inlet for the antifreeze that runs through the throttle body