Search results

Just ordered my rotors form R1 Concepts. Cross drilled and slotted for about $130 including shipping. Now that is what I call a good deal.

808808, thanks I just ordered my MSP rotors form R1 Concepts, cross drilled and slotted for about $130 shipped. Great Deal(2thumbs)

I was thinking of getting some form rotorworks just like those. Are they any good? What kind of driving are you doing? Regular and spirited driving or autoX?

Thanks, will take a look into these.

O.k. I plan on buying new rotors and pads because they are worn out and not smooth any more. I would like to know you guys thoughts on these rotors and pads. They are form ebay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160115098462&fromMakeTrack=true 2 front and 2...

Thanks but i just want the flange so that i can put a greddy type s on my stock pipe.

As said wtb Flange for greddy type s. Any kind, as long as it will fit the greddy type s bov.If you have one send me a PM and the price. Use or new. Thanks

They have no clue what it is.

O.K. I just made my CAI the ghetto way like Kypatrick. Put a 70-90 degree 3" IC pipe on the MAF and through the open hole on the side. Makes the trukey very loud. Have a generic filter plan on puting a K&N filter. What is the best size? I thinking of 3" hole for pipe, 6" bottom, 4-5" tip and...

Is the front mount the most important mount to change?

I just want to know does our car come with red motor mounts? I checked my mounts and noticed that the front mount was red and the others were black. Which mount are the most important to change?

I have some 3" IC pipes. Is there a way to make a CAI without moving the coolant reserve? What is your process for DIY?

I check on ebay and they always have intakes for protege not the speed. IF I were to just add a filter do I just connect the MAF to the filter? What about the Air Temperature Sensor?

Are there any SRI/CAI for MSP that aren't so expensive? I been searching and can't find any SRI/CAI that are made for the MSP that aren't Fujita,Injen,AEM,WeaponR. Is there any cheap SRI/CAI for MSP? Hp gain are all about the same right?

want to buy ic cold pipe

Want to buy stock IC cold pipe in working condition. Send me a price and pic.

O.k. so with the greddy type s bov all I have to do is just tape the breakbooster and put the vaccum hose form the bov to the breakbooster right? What kind of adjusting do I have to do on the adjusting screw on top of the bov? Any input is welcome.

O.K. so the T has one hose for the wastegate, one for the bpv and one for the manifold. I just want to add a greddy bov s to my car. Do I just change the IC pipe that goes to the manifold? When I tap the breakbooster which hoses goes to it? Is it the bov and the bpv? If so then what do I...

So Wbriggs after taping the brakebooster twice, one goes to the bov and the other goes to the bpv right? What do I do with the other vaccum hose that the bpv originally went to? By the way what is the size of your pipe for your bov? Thanks

When I remove the soft plastic that is inside the springs the yellow plastic part is on the bottom. Is it supose to be up higher?