Search results

Sorry, I had a senior moment when I read Jeff's response. If yours had the TPMS sensors then making a tube you can pressurize like I outlined would take care of your light.

If that is the case then it should be like our CX-5 and have a button allowing you to basically calibrate the settings for your tire pressure. If so then Bruce should be able to clear his TPMS light.

Yes, they broke the bead enough to allow them access to the interior of the tire. The patch is a stem on it that is pulled through the hole so you get the hole closed up completely.

Picked up a nail from somewhere so put the temp spare on yesterday to take the punctured one to be repaired. First time I have driven on a temp spare, I thought my front axle bearings were failing from the noise it made. Thankfully only had to drive on it for six miles total. Puncture is fixed...

If you still have your TPMS sensors, fabricate a PVC pipe cylinder with a Schrader valve on one end. Put the sensors in it and put in the air pressure you need to clear the light. Then just stow the cylinder in your car. Voila!

Got under her this morning to calibrate the O2 sensor. I have been seeing unusual AFR readings (higher than normal under steady state cruise), at first I thought maybe it was due to the colder temperatures we’ve been having but my gas consumption was up as well. Thinking about it yesterday I...

Everything was nicely dry this morning so proceeded with the installation. Yesterday evening I put the edging back on, along with a piece of silicone hose I split to cover the cut-out area for my tow hook. That looked like this: I ended up taking off the hose piece as there wasn’t enough room...

So far haven’t been able to figure out the charging situation. Have to keep on it. Last week I had the chance to buy one of the Moss Miata front grilles locally so took it. When it showed up it looked like the UPS folks tried folding it up in two places. Luckily I was able to fold it flat with...

Buffed the wax first thing this morning, then dove into the interior. Cleaned everything, conditioned the leather and treated the vinyl. Finished up by treating all the exterior plastics and tires. Looks much better.

It's kind of a Zen thing for me. Would be easier if my wife kept things cleaner when I'm gone, but I love having a clean vehicle.

Washed her, clay barred, sanded/polished headlights, rewashed with Dawn to remove old wax etc, touched up all the little paint chips I could see. Did some interior cleaning as well. Waiting on the paint to dry before applying wax, will buff it in the morning. Then just have to finish up my...

Got home from training, after recovering from driving 1100 miles in 15 hours 47 minutes I had a look today. Despite the CEL coming on every time I started her for my trip (three times if you’re counting), the CEL never lit. Battery measured 12.7 volts beforehand. Fired right up, measuring...

Well my trip came to an abrupt halt Saturday morning. I was enroute in the dark and rain when I noticed it seemed like my dash lights were dimming. Thought maybe I was imagining things, then I noticed the wipers were slowing down. Started feeling dread, I turned around and headed back home (I...

Picked up and installed my hardtop. It was buried in my storage so took a bit to unearth it, I had just gotten everything stowed again and was driving off when it started spitting rain. Unfortunately I didn’t drive through enough rain to clean the dust off the top so she’s getting a bath as some...

I’ll be taking a trip in a few days and decided to use my hardtop, so I stopped by my storage this morning to pick up the side pieces I have cut for the side latches. Cleaned those up once home, installed them and put on the Beatrush lower latches. While I was welding on the muffler hanger, I...

Put her up in the air after some cars & coffee this morning and set about rewelding that muffler hanger. Took me a couple of tries, I wasn’t getting good penetration with the tacks I made to target the hanger so I finally said screw it, pulled the muffler off and eyeballed the location (the...

Was still having some brake pulsing so figured those sliding pin bushings were too swelled. Asked the dealer if the rear caliper sliding pins were available but you can only get them with the brackets. Looked on Rock Auto and found you can get a brake rubber kit with those pieces and the sliding...

Gave her a bath today and was happy to note no dribbles on the inside of the windows as used to happen before my adjustments. Unfortunately I also discovered that the weld I did when relocating the fourth muffler hanger broke and the muffler was hanging low on that side. Safety wire to the...

A few days ago I decided I needed to make sure I hadn’t left the wideband output offset when I initially installed it. I couldn’t find the connection cable so ordered another one. Once that came in I removed the gauge thinking that all I needed to power the gauge was the connection cable. WRONG...