Search results

That's what I was thinking but it has the tab on it and certainly would be easy enough even for the girlfriend to unplug if she didn't like it. "SP3" maybe would like to answer ??

Where do you have to plug this to..?...

You can get a piece of 2.75" hose and cut off a 3/4" "ring", slip it on the stock air intake pipe and the 3" ID filter should snug up nicely.

Part RR-3003 Product Specifications Product Style: Round Tapered Universal Air Filter Base Outside Diameter: 6 in (152 mm) Flange Inside Diameter: 3 in (76 mm) Flange Length: 1.75 in (44 mm) Flange Type: Centered Height: 5 in (127 mm) Top Outside Diameter: 5.25 in (133 mm) Top Style: Metal Top...

Those of you who have had aftermarket springs (Cobb, Eibach, H&R, et. al.) but left your struts/shocks stock, can you give me your assessment of how things are going..?...is the "it will blow your stockers" argument valid, need for camber readjustment in your case or not, overall improvement in...

You lost me there...can you explain?

Aren't the bulbs shown in last picture H4/9003 per package label ?

What map(s) is on the standalone at present, i.e. setup for what mods? THX

PM sent

Yep...otherwise they squeal rather bodaciously. You can get some of the antisqueal paste from Autozone or put a dab of RTV on the backsides which will tone things down.

Do you still have the silver antisqueal shims for the EBC's...?

I have 225/45's on RX-8 rims too..no problem. This guy trying to sell his tires has 255/45-18's which ain't going to fit no way no how on a MS3 without tubbing the darn thing.

I had a nice assortment of vacuum hose already to chose from and fixed the problem easily as I mentioned. I was in the dealer's neighborhood and thought I'd pick up the OEM piece "just cuz"....sorta knew already they would balk at this but had to hear their story in person and show them how the...

I have a JEG's tire size jig which will bolt onto the hub and you can set it for different widths, diameters, offsets and check for clearance....no frigging way that size Falken will fit, front or back, without SawzAlling an inch off the fenders, both with the 40 and 45 series

I have an 08 low mileage (7,200 miles) MS3 which suddenly had the Scanguage showing boost levels of 22+ psi WOT. Interestingly, no fuel cut but I didn't let it stay at this boost level for more than a second just to confirm it was a recurrent event. After a fair amount of visual inspection, I...

You might want to try a Mustang Forum to sell these....

Pirelli P-zero's have dissappointed in the past...I had used quite a few on an Audi A8 because the price was good and had 2 with sidewall belt defects. Nothing special in the grip department and will howl to awaken the dead when pushed in curves unless overinflated by 20%.

I have taken 4" x 4" pieces of 2 x 4 and cut slots in them about 1" deep against the grain and reinforced the not slotted side with a piece of sheet metal or plumber's strap...these will fit in the side lift ridge areas and distribute the lifting force so distortion of the metal flange is...

What does the DashHawk say at WOT in 3rd gear pull ?

Summer blend of fuel has arrived ?