Search results

  1. M

    Which of these three top oils?

    That Valvoline seems like amazing stuff.
  2. M

    Which of these three top oils?

    Lots of in-depth conversations of synthetic oils on that forum enough to make your head spin.
  3. M

    Which of these three top oils?

    Mobile 1 isn't a fully Group IV synthetic, hasn't been for quite a few years. They were 30% PAO a few years ago and since then that percentage has dropped. About the only true PAO oil I'm aware of is Ravenol, maybe HPL.
  4. M

    Delphi Control Arms

    I miss those greasable ball joints, at least when the seal starts cracking you know you can get some lubrication in there.
  5. M

    Which of these three top oils?

    Amsoil, currently using
  6. M

    Delphi Control Arms

    Don't know, but I had mine done 2 years ago with Dormans (Aftermarket supplier). Drivers side ball joint was popping in and out already, had it replaced last week. I should've stuck with the Mazda OEMs. Yes, expensive, but the last ones lasted 9 years.
  7. M

    Brakes Need Work Again

    That's an interesting suggestion. I tend to let my old rotors pile up and them bring them to the city's recycle center. I may have to rethink that and head to the scrap yard instead. Those things have some pretty good weight when they pile up.
  8. M

    Crush Washer/Gasket Size ID or anyone have a p/n for Mazda?

    A torque wrench would do you well instead of cranking down...
  9. M

    Brakes Need Work Again

    I'm currently using Brembo pads with Brembo rotors, good combo, no dust, good stopping power, no noise.
  10. M

    2013~2016 Inspecting and Re-Torquing my CX-5 Lower Control Arms

    Did you try spraying the control arm and sway bar bushings with silicone?
  11. M

    API SP vs. API SN OIL

    I just look for the ILSAC rating, latest one is 7a I believe
  12. M

    Switched to 5W-30 from 0W-20

    Now that the CAFE standards are being rolled back I think you're going to see a lot of this, it should be telling if car manufacturers start using thicker oils.
  13. M

    Switched to 5W-30 from 0W-20

    Honestly, if you plan on keeping the car for a long time, I wouldn't go past 5000 miles on an OCI. Amsoil is very good oil, 5w-30 Signature Series is what I'm currently using. Oil is relatively cheap compared to a engine replacement.
  14. M

    2017~2025 CX-5 Paint hard to match Soul Red

    Paint has to cure, takes a few weeks to do that, you might want to check for any imperfections after this period like runs, dirt in the paint, etc. that won't show up in fresh paint.
  15. M

    2017~2025 CX-5 Paint hard to match Soul Red

    A week after I got mine I was hit in the front end, had to get the front bumper cover replaced, the Soul Red color. The body shop I used match it phenomenally perfect. Look for a high end body shop, look for the I-CAR Gold Class rating to start. Matching the Soul Red color
  16. M

    Shifting in cold weather

    I've owned 2 generation 1 CX5s, never noticed any abnormal shifting
  17. M

    Shifting in cold weather

    Fluid level could be low
  18. M

    Engine Vibration Under 2000 RPM

    Possibly bad motor mounts.
Back