Search results

  1. F

    Mazda not starting due to busted starter cable

    Best it to remove the starter unit and check what needs to be replace. If the wire needs replacing perhaps sourcing from a wrecker?
  2. F

    P0304 Error. Help tried everything!

    Have you swap one of the coil pack to cyl 4 and check if the other cylinder has the same problem ? then you can assume that the ignition coil pack is the problem. Also check if any intake vacuum hose are worn out / have cracks on them & check PCV Hoses under the intake manifold.
  3. F

    2013~2016 Mazda CX-5 Strut Shock Absorber Replacement

    The reason i choose this brand they are value for money for parts made in Japan Osaka. Quality wise very similar to OEM ones. But we will see Hopefully they last long just like the OEM ones.
  4. F

    2013~2016 Mazda CX-5 Strut Shock Absorber Replacement

    Yes that is coming very soon . 😁👌🏻
  5. F

    2013~2016 Mazda CX-5 Strut Shock Absorber Replacement

    Mazda CX-5 Shock Absorber Replacement .
  6. F

    Idles at 500 RPM, noticeable vibration

    have you check OCV / VVT Valve unit if its operating properly ? I would also check the intake valves if its caked up…
  7. F

    2013~2016 CX-5 CV Axle Repair & Refresh

    Hi y’all, hope you guys are well, just like to share it here. Godbless 👍🏼 Mazda CX-5 CV Boot Axle Repair & Refresh.
  8. F

    Guide How to clean Camshaft Position Sensor (2.0L & 2.5L Skyactiv)

    Well i did not have any issues with my CX5. But if you were having issue with your CX5 as per below you want to check on these sensor. A dirty Camshaft Position (CMP) sensor can cause a range of engine problems because it sends inaccurate information to the car's computer. The most common...
  9. F

    Guide How to clean Camshaft Position Sensor (2.0L & 2.5L Skyactiv)

    How to remove and clean CMP Sensor Exhaust side. Mazda CX-5 2.0L & 2.5L Skyactiv.
  10. F

    Guide How to troubleshoot Purge Valve Solenoid Mazda CX-5 2L & 2.5L

    after driving about 10 15 mins around the block you will feel the engine is hesitating to idle normally. You will get Low Idle most of the time like the car is about to stall.
  11. F

    Guide How to troubleshoot Purge Valve Solenoid Mazda CX-5 2L & 2.5L

    I had to replace it since its getting really annoying. Mazda CX-5 Purge Valve Solenoid Replacement
  12. F

    Guide How to troubleshoot Purge Valve Solenoid Mazda CX-5 2L & 2.5L

    How to troubleshoot Purge Valve Solenoid. Erratic & Very Low Idle.
  13. F

    Need help with replacing HID Lightbulb (2014 CX-5)

    How to Upgrade Headlight Xenon HID to LED Bulb D4S. Mazda CX 5 2012 - 2014. Installation guide. Hope this helps.
  14. F

    Replacing rear wiper

    Here it is
  15. F

    Replacing rear wiper

    alrighty will do 👍🏼😁
  16. F

    2013~2016 CX-5 Front Suspension Overhaul

    Very true i should’ve bought new Struts for this install. i am Still using the old struts. 😂😂😂.
  17. F

    2013~2016 CX-5 Front Suspension Overhaul

    Hi guys, hope this video will help you do your front suspension repair. Mazda CX-5 Front Suspension Overhaul DIY
  18. F

    2013~2016 CX-5 PCV Valve Maintenance Check or Replace

    i Indeed sir would be similar on the 2.5L but less room. Still easily access & doable .
  19. F

    2013~2016 CX-5 PCV Valve Maintenance Check or Replace

    PCV Valve Maintenance Check / Replace? Mazda CX-5 2.0L & 2.5L
  20. F

    2013~2016 CX-5 Rear Lower Engine Mount Replacement Guide

    Cheers man . let us know how u go . if you dont mind take a couple of pics of the old part. 😁
Back