Search results

  1. S

    Intermittent starting problems (Mazda5)

    If this is 100% reproducible, I'd take out the (FoMoCo) throttle body, clean it thoroughly, and go through idle relearn. https://www.youtube.com/watch?v=JPNnHU6PYbo https://www.youtube.com/watch?v=ZNxXM75zJOw https://mazdas247.com/forum/attachments/ms3-tbw-mapping-pdf.210155/
  2. S

    What have you done to your Mazda5 today?

    Not sure how long you plan to keep her running but consider adding one of these inline between the trans pump outlet and the trans cooler/temp regulator (note this will add an item with service life). https://www.magnefinefilters.com/
  3. S

    Intermittent starting problems (Mazda5)

    When you waited for the ~3sec, did you hear the fuel pump prime (it is faint but audible in driver seat, pump is under rear passenger seat). Next I'd try to a warm start (again after 3-5 sec wait) with the gas pedal pressed down. These warm starts, can I assume the key was removed from the...
  4. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    I can assume you did your tire research but why opt for AS 4 series instead of summer when you are planning on dedicated winter tires? Seems like you are trading-off for something that you'll never benefit and expecting an AS to perform like a summer series. But it sounds like anything will...
  5. S

    Intermittent starting problems (Mazda5)

    Suckers are hard to find... Can you try this warm start; turn the key to 'on' position and wait 3 seconds (instead going back to off), then restart -does it start?
  6. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    I guess my dyslexia is kicking in b/c I just did brakes. Now this got me thinking if mine is different b/c I'm aftermarket pins (previously bought new set with boots) or if b/c these are MS3 calipers? hmmm. Hunter FTW. Did you provide these alignment values to the shop to set or did they set...
  7. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    I think left (elongated tip) is the Mazda. The pins are pretty universal. If you check out the Mz5 slider pins on Rockatuo, it'll show the full compatibility list -long list of manufacturers (not just models) use the same part. Considering ATE is the OEM brake supplier, I would suspect all of...
  8. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    LOL. You just unlocked a new chapter in the Drift Bible - The Double Heel-Toe Foot Brake Feint.
  9. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    It's possible and BITOG has some details comparisons and is the better platform to discuss this, or start another thread so it doesn't clog up OP's thread. Keep in mind the difference between knock-off vs counterfeit vs low QC (more plant issue, contracts are finite, than country of origin)...
  10. S

    Intermittent starting problems (Mazda5)

    Re-reading this, I don't think it's the starter. -If it takes more cranks than usual to start, then the starter is turning. A bad starter would not turn. A long crank is typically indicative of a failing battery (battery's CCA degrade). -Since it did fire up, the starter is out of the...
  11. S

    Intermittent starting problems (Mazda5)

    Always park in a (every so slight) decline and bump-start car? Isn't this why you got a manual :D IIRC, the Mz3 had issues with the ground or positive cable to the starter. Check connection points and trace wire. I'm fortunate to say I've not had many issue with starting the car, except...
  12. S

    Mazda5 infotainment display upgrade tech specs?

    Pretty much all of our electronics are coming from China (iPhones, computers, etc.)... I don't think you can expect to pay $39 and expect a high end product, that's not realistic. Everything has a pricing tier and YGWYPF. When shopping for Android headunits, be sure to do your due diligence...
  13. S

    Mazda5 infotainment display upgrade tech specs?

    Considering this is early-mid 2000 tech, I'd bet resolution is similar to the other EDT70 model @320x240. Its prob not worth it and its only the screen so you'd still need to add a source. I'd suggest going with a 9" android. There are a lot Mazda 5 android radios on the internet (comes with...
  14. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    You guys really hate Moog. But one can't argue against OEM if you can/want to spend that kind of money. I just did brakes yesterday and had a good look at some of my suspension parts. https://i.imgur.com/lY2V1FA.jpg I recall the Moog front end links were made in Mexico (don’t knock Mexico!)...
  15. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    Interesting ETCG is ranting on an 'adjustable' arm with zerk fitting, which is not an OEM equivalent part. He'll likely have less issue if he'd just use an OEM equivalent non-adjustable part for comparison. He acknowledges there are no other options that fit his criteria and the mod (cutting...
  16. S

    Inner and outer Mazda5 tie rod replacement (smiley)

    Wow. I'm in the wrong business... It is easy as cake and a standard job. If you want to make the outer rod job easier, I suggest using the free loaner ball joint forks. Insert two into the ball joint at opposite ends and a simple press will separate them without any effort. I haven't replace...
  17. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    Futmoto Valve (aka Quickdrain valve) with the nipple extension to replace the drain bolt. +4" trans hose and you can drain hot oil right into catch pan or 5qt jug. There are a few imitation brands now but I believe Futmoto is still made in Japan but cost a little more...
  18. S

    Koni Special Actives installed. Smooth but crashy?

    IIRC, Shaikh@FatCat started out making custom bump stops that pair for specific models. He has a shorter/progress bump stop specially for FSD with stock springs on Mz3/MS3 (Mz5 front would be a close match). https://fatcatmotorsports.com/FCM_Koni_products_MS3.htm Over the years, they've become...
  19. S

    Koni Special Actives installed. Smooth but crashy?

    Keith Tanner's advice is always golden. He is the founder/race car enthusiasts of Flyinmiata.com and wrote a few books on performance. I read/understand the conclusion to be the same; Koni Special Actives seem to be working as designed. If you want to dig further or see if you can optimize...
  20. S

    IamFODI's 2012 Mazda5 6MT: Intro, plans, questions and build

    +1. The "engages much closer to the floor" comment leads me to believe it is the slave. Given the car's age/mileage, I would replace (complete change and pressure bleed) the brake and clutch fluid first. Unless the 2nd gen changed (highly doubt), it uses a shared fluid system for both brakes...
Back