Search results

can i use redline D4 ATF ?

i didnt contact WT, didnt see enough interest earlier... thought their factory are in US oO was hoping someone in the US could contact them and send in a model car to do the laser 3D reading also note here: our floor liner looks like Mazda 5's floor liner. i am emailing WT to see if they...

ty, just wanna confirm the part# for the white one, if u say they are interchangeable then the # FS05-18-741 should be good for both then oO for the O2 sensor i am just getting annoyed that i have to change it like every year exhaust heatshield and turbo timer might help prolong the life...

its 2nd time i am getting P0133 (last time i changed the O2 sensor on the exhaust manifold and solved, i guess its the aftermarket sensor quality ? or its the ebay knockoff manifold too hot for it?) note: the original O2 sensor failed after i changed the manifold for like few months, this...

did more voltage reading the fuse box only the bottom fog light fuse has constant 12volt no matter the car is on/off on its right pin, the top one doesnt have any voltage no matter car on/off switch on/off does it work like this? or the top one suppose to have 12volt going through them...

i tested everything on bumper side with the continuity setting on my multimeter, reading shows all good, and i tested relay and switch for voltage all good ,and both relay + switch functions as i click them but when i test the E7-03 connector(located near the windshield washer fluid that...

voltage stops after the relay , so it must be somewhere near the X-01 thingy. what is it?

yea tanks. i just finished testing it. it works, the blue wire has voltage after i turn on fog light , red wire gets voltage too. same as the switch, blue yellow wire has voltage after i turn the switch on, red wire gets voltage. also tested the fuse at fuse box, both 15A fuse for fog...

after looking underneath for hours.... i am completely lost... anyone give me an idea where exactly the relay would be? also i found this connector not connected. any idea? （red circled）

19-B3444 and 19-B3445 come with bracket so it should fit protege? anyone tried?

thks looks like the relay is somewhere behind the steering wheel(boom04) gonna try to find it tomorrow

took the switch down today, think the relay is integrated in the switch itself tested continuity the red white line is connected with the blue yellow line when switch is clicked but i cant read any voltage from these 2 wires edit: later i found out voltage reading only possible with "keys...

where the relay would be?

checked the connector beside the washer fluid reservoir, it show no voltage, (so it must be the foglight switch or relay?)

fuse is good, bulb looks good too, tested continuity on everything on bumper side, all good can anyone give me a fog light diagram?

i dont know if thats a sensor, but theres 2 connector connected, and its showing in my dash that i have low fluid level, so it must be a fluid level sensor or something alike

i mean theres already 2 plugs connected to the fluid bottle, 1 for the pump and 1 for the sensor （and that sensor is alraedying telling me low on fluid today, cause i took the fluid reservoir off to mount FMIC and not much fluid left in） this plug is another fluid level sensor?

i dont get it, the dash still show low on washer fluid when its low and the plug is extra?

just realized that fan wasnt pluged in for a full year

found the 1" adapter on Kijiji.ca last year for 19.99 pick up locally. but not anymore