Search results

Purchased some Shinko 804/805 tires so I can do offroad. More pics coming soon, added some lights and will be adding bar risers as well.

Put some new switchbacks in, one of the white leds was flickering.

Yes, the turbo and the CX-9 have the same front brake hardware. You can double check p/n on a mazda website such as zoomzoomnationparts.com or call the dealer and ask if the discs are interchangeable.

higher octane (93) is more likely to maintain nominal power under adverse combustion conditions(and allow more aggressive timing, with less knock count).. in basics. Not sure about the 110, although the reasoning is the same, this engine doesn't rev high enough for me to want to buy that in a...

Getting a new windshield tomorrow

Usually, if the car has never been titled it can still be considered new

I'll pay the extra 16$ for more uniform resistance across the plugs... since the acceptable range by the ecu is about 6000 ohms I don't want a plug at the bottom and one at the top.. since the spark plug is the primary KS I want consistent feedback. Also fwiw, my 93 tuned car which is wot shift...

I hit a dog, luckily did not fall

Pm'd OP. Replaced mine with a used unit from a 2016, used all old parts, no issues with it and codes/driveability whatseover, had the code updated at the dealer anyways for good measure. Went in with the 2 or 3 pages from the manual printed out detailing the process and got it done. The DSC...

Well, it's just very flexible rubber. It's only a matter of time, if you look closely you might see tears in the "arms" that make up the mounting body.

Wouldn't bother. Not worth the effort to remove it (rear diff comes out). Filling around the already ripped mount makes it stiffer than stock anyhow.

You will always have more performance potential with higher octane fuel as combustion conditions deteriorate, doesn't matter what engine because it's simply science. I guarantee that 87 dyno is way off if you are driving in 100f weather with 3000 foot density altitude (at 500 foot elevation)...

Replaced some anti rattle clips that I didn't have on hand when I changed the pads a while back. But I only bought the fronts by mistake. Also added more fill to the trash rear diff mount. It'll be filled eventually.

Zongshen , chinese company. CSC dealer(California scooter company) on California is the elusive importer/dealership in the usa

Thailand filters are considered "premium mazda brand" the value one comes from Mexico.

surprised. The primary engine mount contains fluid othe ones just rip/wear out. You can get poly or hardened rubber mounts from aftermarket

It's a wear item, I'd be surpised.

Yes.. the power cut is excessive and you will lose acceleration assuming you have good tires. The more you explore the tcs/dcs the more you may find it counterintuitive a lot of times